[{"version":"13.1.2-rc.4","channel":"beta","changelog":"<p><strong>Flow</strong></p>\r\n<ul>\r\n<li>Fixes missing \"capability is true/false for duration\" Flow cards.</li>\r\n</ul>"},{"version":"13.1.2-rc.3","channel":"beta","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Improved translations.</li>\r\n<li>Fixed an issue that caused the LED ring to light up during update installation even though it was disabled.</li>\r\n</ul>\r\n<p><strong>Apps</strong></p>\r\n<ul>\r\n<li>Fixed an issue where discovery conditions within the same inner array were evaluated as OR instead of AND.</li>\r\n</ul>\r\n<p><strong>Matter</strong></p>\r\n<ul>\r\n<li>Fixed a Matter specification compliance issue regarding microwave/oven control.</li>\r\n<li>Fixed an issue that could cause a temporary invalid interpretation of the on/off state for valves.</li>\r\n</ul>\r\n<p><strong>Zigbee</strong></p>\r\n<ul>\r\n<li>Improved handling of IAS zone enrollment.</li>\r\n<li>Fixed an issue where Zigbee devices would need to be re-paired after restoring a backup to new hardware, by restoring the coordinator's IEEE address.</li>\r\n<li>Reduced the time required for Homey Bridge to join Homey Pro's Zigbee network as Satellite.</li>\r\n</ul>"},{"version":"13.1.1","channel":"stable","changelog":"<p><strong>Apps</strong></p>\r\n<ul>\r\n<li>Fixed an issue that could cause a timeout when installing or updating an app from the Homey App Store.</li>\r\n</ul>"},{"version":"13.1.0","channel":"stable","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Updated locales.</li>\r\n<li>Fixed an issue that could prevent a disconnected Homey Bridge from being marked as unavailable.</li>\r\n</ul>\r\n<p><strong>Matter</strong></p>\r\n<ul>\r\n<li>Added support for syncing Homey’s language with devices.</li>\r\n<li>Added support for syncing Homey’s time with devices.</li>\r\n<li>Added support for EV chargers.</li>\r\n<li>Added support for water heaters.</li>\r\n<li>Added support for changing a sensor’s sensitivity.</li>\r\n<li>Added support for dishwashers.</li>\r\n<li>Added support for laundry dryers.</li>\r\n<li>Added support for microwaves and ovens.</li>\r\n<li>Added support for valves.</li>\r\n<li>Added support for enabling/disabling a robotic vacuum cleaner’s zones through Flow.</li>\r\n<li>Added continuous dimming Flow cards for lights.</li>\r\n<li>Improved support for intermittently connected devices.</li>\r\n<li>Improved door lock support with more modes, door-open status, auto-relock, and additional settings.</li>\r\n<li>Improved support for devices with multi-phase energy/power metering.</li>\r\n<li>Fixed an issue where dimming a light to 0% with a duration would ignore the duration.</li>\r\n</ul>\r\n<p><strong>Thread</strong></p>\r\n<ul>\r\n<li>Fixed an issue where devices couldn’t join Homey’s Thread network in some cases.</li>\r\n</ul>\r\n<p><strong>Zigbee</strong></p>\r\n<ul>\r\n<li>Extended functionality of generic Zigbee devices (e.g. sensors, locks, window coverings, thermostats).</li>\r\n<li>Improved handling of energy metering reports for generic Zigbee devices.</li>\r\n</ul>\r\n<p><strong>Experiments</strong></p>\r\n<ul>\r\n<li>Fixed an issue that could cause the SSH Experiment to not start correctly.</li>\r\n</ul>\r\n<p><strong>Apps</strong></p>\r\n<ul>\r\n<li>Improved stability of running Python apps.</li>\r\n<li>Fixed an issue that could cause an app to not install properly when being manually installed while already automatically updating.</li>\r\n</ul>\r\n<p><strong>Flow</strong></p>\r\n<ul>\r\n<li>Fixed correct step size for sunrise and sunset Flow triggers.</li>\r\n</ul>\r\n<p><strong>BLE</strong></p>\r\n<ul>\r\n<li>Fixes an issue where invalid BLE characteristic UUID's could be returned.</li>\r\n</ul>"},{"version":"13.1.0-rc.7","channel":"beta","changelog":"<p><strong>BLE</strong></p>\r\n<ul>\r\n<li>Fixes an issue where invalid BLE characteristic UUID's could be returned.</li>\r\n</ul>"},{"version":"13.1.0-rc.6","channel":"beta","changelog":"<p><strong>Apps</strong></p>\r\n<ul>\r\n<li>Improved stability of running Python apps.</li>\r\n</ul>"},{"version":"13.1.0-rc.5","channel":"beta","changelog":"<p><strong>Apps</strong></p>\r\n<ul>\r\n<li>Improved stability of running Python apps.</li>\r\n<li>Fixed an issue that could cause an app to not install properly when being installed with Homey CLI while already automatically updating.</li>\r\n</ul>"},{"version":"13.1.0-rc.4","channel":"beta","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Updated locales.</li>\r\n<li>Fixed an issue that could prevent a disconnected Homey Bridge from being marked as unavailable.</li>\r\n</ul>\r\n<p><strong>Matter</strong></p>\r\n<ul>\r\n<li>Added support for syncing Homey’s language with devices.</li>\r\n<li>Added support for syncing Homey’s time with devices.</li>\r\n<li>Added support for EV chargers.</li>\r\n<li>Added support for water heaters.</li>\r\n<li>Added support for changing a sensor’s sensitivity.</li>\r\n<li>Added support for dishwashers.</li>\r\n<li>Added support for laundry dryers.</li>\r\n<li>Added support for microwaves and ovens.</li>\r\n<li>Added support for valves.</li>\r\n<li>Added support for enabling/disabling a robotic vacuum cleaner’s zones through Flow.</li>\r\n<li>Added continuous dimming Flow cards for lights.</li>\r\n<li>Improved support for intermittently connected devices.</li>\r\n<li>Improved door lock support with more modes, door-open status, auto-relock, and additional settings.</li>\r\n<li>Improved support for devices with multi-phase energy/power metering.</li>\r\n<li>Fixed an issue where dimming a light to 0% with a duration would ignore the duration.</li>\r\n</ul>\r\n<p><strong>Thread</strong></p>\r\n<ul>\r\n<li>Fixed an issue where devices couldn’t join Homey’s Thread network in some cases.</li>\r\n</ul>\r\n<p><strong>Zigbee</strong></p>\r\n<ul>\r\n<li>Extended functionality of generic Zigbee devices (e.g. sensors, locks, window coverings, thermostats).</li>\r\n<li>Improved handling of energy metering reports for generic Zigbee devices.</li>\r\n</ul>\r\n<p><strong>Experiments</strong></p>\r\n<ul>\r\n<li>Fixed an issue that could cause the SSH Experiment to not start correctly.</li>\r\n</ul>\r\n<p><strong>Apps</strong></p>\r\n<ul>\r\n<li>Improved stability of running Python apps.</li>\r\n<li>Fixed an issue that could cause an app to not install properly when being manually installed while already automatically updating.</li>\r\n</ul>\r\n<p><strong>Flow</strong></p>\r\n<ul>\r\n<li>Fixed correct step size for sunrise and sunset Flow triggers.</li>\r\n</ul>"},{"version":"13.0.0","channel":"stable","changelog":"<p><strong>Apps</strong></p>\r\n<ul>\r\n<li>Added support for the Python Apps SDK.</li>\r\n</ul>\r\n<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Fixed an issue that could cause timeline notifications without text.</li>\r\n</ul>"},{"version":"12.13.0","channel":"stable","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Updated translations.</li>\r\n<li>Fixed an issue where reinstalling an app could remove it if the download failed.</li>\r\n</ul>\r\n<p><strong>Apps</strong></p>\r\n<ul>\r\n<li>Added <code>target_power</code> and <code>target_power_mode</code> capabilities for controlling devices like <a href=\"https://apps.developer.homey.app/the-basics/devices/energy\">EV chargers and home batteries</a>.</li>\r\n</ul>\r\n<p><strong>Device</strong></p>\r\n<ul>\r\n<li>Fixed capability values being set to slightly out-of-range values due to rounding order.</li>\r\n<li>Fixed \"last seen at\" not updating correctly for some devices.</li>\r\n</ul>\r\n<p><strong>Z-Wave</strong></p>\r\n<ul>\r\n<li>Fixed an issue where migrating from Homey Pro (2016–2019) to newer versions could result in Z-Wave nodes not being migrated correctly.</li>\r\n</ul>\r\n<p><strong>Zigbee</strong></p>\r\n<ul>\r\n<li>Devices that previously left the Zigbee network are now automatically made available again when they continue to communicate.</li>\r\n<li>Repairing a Zigbee device with a physically different unit is now supported, as long as the model and manufacturer names match.</li>\r\n<li>Various Zigbee stability improvements and bug fixes.</li>\r\n</ul>\r\n<p><strong>Matter</strong></p>\r\n<ul>\r\n<li>Improved automatic driver selection for bridged devices.</li>\r\n</ul>\r\n<p><strong>Flow</strong></p>\r\n<ul>\r\n<li>Added new multi-select Flow cards for \"day/week/month and season is\" conditions.</li>\r\n</ul>\r\n<p><strong>Insights</strong></p>\r\n<ul>\r\n<li>Fixed an issue that caused missing device names in Insights migrated from Homey Pro (2016—2019).</li>\r\n</ul>"},{"version":"12.13.0-rc.6","channel":"beta","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Updated translations.</li>\r\n</ul>"},{"version":"12.13.0-rc.5","channel":"beta","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Updated translations.</li>\r\n</ul>\r\n<p><strong>Zigbee</strong></p>\r\n<ul>\r\n<li>Minor stability improvements.</li>\r\n<li>Cleanup unknown nodes in developer tools.</li>\r\n</ul>"},{"version":"12.13.0-rc.4","channel":"beta","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Updated translations.</li>\r\n</ul>\r\n<p><strong>Zigbee</strong></p>\r\n<ul>\r\n<li>Fixed an issue that could cause Zigbee to not start properly.</li>\r\n</ul>\r\n<p><strong>Insights</strong></p>\r\n<ul>\r\n<li>Fixed an issue that caused missing device names in Insights migrated from Homey Pro (2016—2019).</li>\r\n</ul>"},{"version":"12.13.0-rc.3","channel":"beta","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Updated translations.</li>\r\n<li>Fixed an issue where reinstalling an app could remove it if the download failed.</li>\r\n</ul>\r\n<p><strong>Apps</strong></p>\r\n<ul>\r\n<li>Added <code>target_power</code> and <code>target_power_mode</code> capabilities for controlling devices like <a href=\"https://apps.developer.homey.app/the-basics/devices/energy\">EV chargers and home batteries</a>.</li>\r\n</ul>\r\n<p><strong>Device</strong></p>\r\n<ul>\r\n<li>Fixed capability values being set to slightly out-of-range values due to rounding order.</li>\r\n<li>Fixed \"last seen at\" not updating correctly for some devices.</li>\r\n</ul>\r\n<p><strong>Z-Wave</strong></p>\r\n<ul>\r\n<li>Fixed an issue where migrating from Homey Pro (2016–2019) to newer versions could result in Z-Wave nodes not being migrated correctly.</li>\r\n</ul>\r\n<p><strong>Zigbee</strong></p>\r\n<ul>\r\n<li>Devices that previously left the Zigbee network are now automatically made available again when they continue to communicate.</li>\r\n<li>Repairing a Zigbee device with a physically different unit is now supported, as long as the model and manufacturer names match.</li>\r\n<li>Various Zigbee stability improvements and bug fixes.</li>\r\n</ul>\r\n<p><strong>Matter</strong></p>\r\n<ul>\r\n<li>Improved automatic driver selection for bridged devices.</li>\r\n</ul>\r\n<p><strong>Flow</strong></p>\r\n<ul>\r\n<li>Added new multi-select Flow cards for \"day/week/month and season is\" conditions.</li>\r\n</ul>"},{"version":"12.12.0","channel":"stable","changelog":"<p><strong>Camera Streaming</strong></p>\r\n<ul>\r\n<li>The Web App now supports showing video streams. Playback outside your local network should also work in most cases. Streams are served via a WebRTC proxy by default, improving compatibility across frontends. Developers can opt out using the <code>disableWebRTCProxy</code> option (<a href=\"https://apps.developer.homey.app/advanced/videos\">docs</a>).</li>\r\n</ul>\r\n<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Updated translations.</li>\r\n<li>Fixed an issue that could cause Homey to crash when interacting with Insights.</li>\r\n</ul>\r\n<p><strong>Matter</strong></p>\r\n<ul>\r\n<li>Fixed an issue that could cause Flow cards for Matter devices to not work.</li>\r\n</ul>"},{"version":"12.12.0-rc.4","channel":"beta","changelog":"<p><strong>Camera Streaming</strong></p><ul><li><p>The Web App now supports showing video streams. Playback outside your local network should also work in most cases. Streams are served via a WebRTC proxy by default, improving compatibility across frontends. Developers can opt out using the <code>disableWebRTCProxy</code> option (<a target=\"_blank\" rel=\"noopener noreferrer nofollow\" href=\"https://apps.developer.homey.app/advanced/videos\">docs</a>). For the best experience use Homey Mobile app v9.7.1 or higher.</p></li></ul><p><strong>Core</strong></p><ul><li><p>Updated translations.</p></li><li><p>Fixed an issue that could cause Homey to crash when interacting with Insights.</p></li></ul><p><strong>Matter</strong></p><ul><li><p>Fixed an issue that could cause Flow cards for Matter devices to not work.</p></li></ul>"},{"version":"12.11.0","channel":"stable","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Updated translations.</li>\r\n</ul>\r\n<p><strong>Apps</strong></p>\r\n<ul>\r\n<li>Added support for new <a href=\"https://apps-sdk-v3.developer.homey.app/tutorial-device-capabilities.html\">capabilities</a>.</li>\r\n<li>Updates Apps SDK to latest version.</li>\r\n<li>Fixed an issue that could cause a capability value to become out of range after rounding to nearest step size.</li>\r\n</ul>\r\n<p><strong>Flow</strong></p>\r\n<ul>\r\n<li>Improved handling of Flows with missing condition cards.</li>\r\n<li>Added token with user name to presence Flow triggers.</li>\r\n<li>Fixed an issue that prevented proper filtering of autocomplete options in Alarm Flow cards.</li>\r\n</ul>\r\n<p><strong>Insights</strong></p>\r\n<ul>\r\n<li>Re-enabled higher resolution for \"last hour\" Insights.</li>\r\n</ul>\r\n<p><strong>Matter</strong></p>\r\n<ul>\r\n<li>Fixed issue where Wi-Fi devices wouldn't automatically connect to Homey's Wi-Fi network.</li>\r\n<li>Fixed issues where Matter devices would try and subscribe twice due to race when starting Homey.</li>\r\n<li>Fixed issues with adding specific Matter devices to Homey (e.g. Meross and Third Reality).</li>\r\n<li>Improved error handling in case Matter could not start.</li>\r\n</ul>"},{"version":"12.11.0-rc.3","channel":"beta","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Updated translations.</li>\r\n</ul>\r\n<p><strong>Apps</strong></p>\r\n<ul>\r\n<li>Added support for new <a href=\"https://apps-sdk-v3.developer.homey.app/tutorial-device-capabilities.html\">capabilities</a>.</li>\r\n<li>Updates Apps SDK to latest version.</li>\r\n<li>Fixed an issue that could cause a capability value to become out of range after rounding to nearest step size.</li>\r\n</ul>\r\n<p><strong>Flow</strong></p>\r\n<ul>\r\n<li>Improved handling of Flows with missing condition cards.</li>\r\n<li>Added token with user name to presence Flow triggers.</li>\r\n<li>Fixed an issue that prevented proper filtering of autocomplete options in Alarm Flow cards.</li>\r\n</ul>\r\n<p><strong>Insights</strong></p>\r\n<ul>\r\n<li>Re-enabled higher resolution for \"last hour\" Insights.</li>\r\n</ul>\r\n<p><strong>Matter</strong></p>\r\n<ul>\r\n<li>Fixed issue where Wi-Fi devices wouldn't automatically connect to Homey's Wi-Fi network.</li>\r\n<li>Fixed issues where Matter devices would try and subscribe twice due to race when starting Homey.</li>\r\n<li>Fixed issues with adding specific Matter devices to Homey (e.g. Meross and Third Reality).</li>\r\n<li>Improved error handling in case Matter could not start.</li>\r\n</ul>"},{"version":"12.10.1","channel":"stable","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Enable notification when software update is available by default.</li>\r\n<li>Increase maximum allowed devices to over 9000.</li>\r\n<li>Various fixes and improvements.</li>\r\n<li>Updates translations.</li>\r\n</ul>\r\n<p><strong>Weather</strong></p>\r\n<ul>\r\n<li>Fixes Fahrenheit conversion.</li>\r\n</ul>\r\n<p><strong>Matter</strong></p>\r\n<ul>\r\n<li>Various fixes and improvements.</li>\r\n</ul>\r\n<p><strong>Energy</strong></p>\r\n<ul>\r\n<li>Fixes an issue where total imported/exported energy would be set to 0 if a frame is received without energy data.</li>\r\n</ul>\r\n<p><strong>Flow</strong></p>\r\n<ul>\r\n<li>Fixes incorrect scheduling for sunrise/sunset triggers when the calculated trigger time has already passed.</li>\r\n</ul>"},{"version":"12.10.1-rc.2","channel":"beta","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Enable notification when software update is available by default.</li>\r\n<li>Increase maximum allowed devices to over 9000.</li>\r\n<li>Various fixes and improvements.</li>\r\n<li>Updates translations.</li>\r\n</ul>\r\n<p><strong>Weather</strong></p>\r\n<ul>\r\n<li>Fixes Fahrenheit conversion.</li>\r\n</ul>\r\n<p><strong>Matter</strong></p>\r\n<ul>\r\n<li>Various fixes and improvements.</li>\r\n</ul>\r\n<p><strong>Energy</strong></p>\r\n<ul>\r\n<li>Fixes an issue where total imported/exported energy would be set to 0 if a frame is received without energy data.</li>\r\n</ul>\r\n<p><strong>Flow</strong></p>\r\n<ul>\r\n<li>Fixes incorrect scheduling for sunrise/sunset triggers when the calculated trigger time has already passed.</li>\r\n</ul>"},{"version":"12.10.0","channel":"stable","changelog":"<p><strong>Flow</strong></p>\r\n<ul>\r\n<li>Adds Flow card action \"Ask question to user\" which enables replying in text to a push notification sent by Homey.</li>\r\n</ul>\r\n<p><strong>Camera Streaming</strong></p>\r\n<ul>\r\n<li>Virtual IP Camera now works with all <a href=\"https://apps.developer.homey.app/advanced/videos#supported-video-types\">supported video types</a> (except WebRTC).</li>\r\n</ul>\r\n<p><strong>Device</strong></p>\r\n<ul>\r\n<li>Fixes a floating point precision error when setting a setting to step multiples.</li>\r\n</ul>\r\n<p><strong>RF</strong></p>\r\n<ul>\r\n<li>Fixes correctly including Homey Pro's own antenna in satellite mode setting.</li>\r\n<li>Fixes recording RF signals with Homey Pro mini.</li>\r\n</ul>\r\n<p><strong>Matter</strong></p>\r\n<ul>\r\n<li>Fixes an issue that caused some Flow cards to not be displayed in the Web App Flow card picker.</li>\r\n</ul>\r\n<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Various fixes and improvements.</li>\r\n<li>Updates translations.</li>\r\n</ul>\r\n<p><strong>Z-Wave</strong></p>\r\n<ul>\r\n<li>Fixes issue in Z-Wave that could cause a lot of traffic to be generated causing some Fibaro devices to potentially become unavailable.</li>\r\n</ul>"},{"version":"12.10.0-rc.16","channel":"beta","changelog":"<p><strong>Flow</strong></p>\r\n<ul>\r\n<li>Fixes an issue that would cause Flow card triggers for boolean capabilities with a duration to be missing.</li>\r\n</ul>"},{"version":"12.10.0-rc.15","channel":"beta","changelog":"<p><strong>RF</strong></p>\r\n<ul>\r\n<li>Fixes recording RF signals with Homey Pro mini.</li>\r\n</ul>"},{"version":"12.10.0-rc.14","channel":"beta","changelog":"<p><strong>Matter</strong></p>\r\n<ul>\r\n<li>Fixes an issue that caused some Flow cards to not be displayed in the Web App Flow card picker.</li>\r\n</ul>\r\n<p><strong>RF</strong></p>\r\n<ul>\r\n<li>Fixes correctly including Homey Pro's own antenna in satellite mode setting.</li>\r\n</ul>\r\n<p><strong>Device</strong></p>\r\n<ul>\r\n<li>Fixes a floating point precision error when setting a setting to step multiples.</li>\r\n</ul>\r\n<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Updates translations.</li>\r\n</ul>"},{"version":"12.10.0-rc.13","channel":"beta","changelog":"<p><strong>Matter</strong></p>\r\n<ul>\r\n<li>Fixes an issue that caused the repair views to error with \"unknown error getting file\".</li>\r\n</ul>"},{"version":"12.10.0-rc.12","channel":"beta","changelog":"<p><strong>Matter</strong></p>\r\n<ul>\r\n<li>Fixes an issue that caused the repair views to error with \"unknown error getting file\".</li>\r\n</ul>"},{"version":"12.10.0-rc.11","channel":"beta","changelog":"<p><strong>Flow</strong></p>\r\n<ul>\r\n<li>Adds Flow card action \"Ask question to user\" which enables replying in text to a push notification sent by Homey.</li>\r\n</ul>\r\n<p><strong>Camera Streaming</strong></p>\r\n<ul>\r\n<li>Virtual IP Camera now works with all <a href=\"https://apps.developer.homey.app/advanced/videos#supported-video-types\">supported video types</a> (except WebRTC).</li>\r\n</ul>\r\n<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Various fixes and improvements.</li>\r\n</ul>\r\n<p><strong>Z-Wave</strong></p>\r\n<ul>\r\n<li>Fixes issue in Z-Wave that could cause a lot of traffic to be generated causing some Fibaro devices to potentially become unavailable.</li>\r\n</ul>"},{"version":"12.9.1","channel":"stable","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Updates translations.</li>\r\n<li>Fixes model name of Homey Pro (2026).</li>\r\n</ul>"},{"version":"12.9.0","channel":"stable","changelog":"<p><strong>Apps</strong></p>\r\n<ul>\r\n<li>Increases allowed duration of exceeding CPU usage limit.</li>\r\n<li>Updates Node.js version to v22 (<a href=\"https://apps.developer.homey.app/the-basics/app#node.js\">learn more</a>).</li>\r\n<li>Fixes an issue with auto-updating apps that could result in the app being uninstalled.</li>\r\n<li>Improves stability of automatic app updates.</li>\r\n<li>Improves stability of apps that use a lot of RAM.</li>\r\n</ul>\r\n<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Updates Node.js version to v24.</li>\r\n<li>Improves memory management.</li>\r\n<li>Fixes an issue that would cause disabled users to not be excluded from presence tracking.</li>\r\n<li>Monitor free memory usage and stop Homey apps when memory is critically low.</li>\r\n</ul>\r\n<p><strong>Energy</strong></p>\r\n<ul>\r\n<li>Fixes an issue with storing Electricity Total and Solar Generated power in Energy reports.</li>\r\n</ul>\r\n<p><strong>Matter</strong></p>\r\n<ul>\r\n<li>Fixes an issue where changing the dim level of a light would also change the color temperature.</li>\r\n</ul>"},{"version":"12.9.0-rc.14","channel":"beta","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Improves memory management.</li>\r\n<li>Minor bug fixes and stability improvements.</li>\r\n<li>Monitors free memory usage and stops Homey apps when memory is critically low.</li>\r\n</ul>\r\n<p><strong>Apps</strong></p>\r\n<ul>\r\n<li>Improves stability of automatic app updates.</li>\r\n<li>Improves stability of apps that use a lot of RAM.</li>\r\n</ul>"},{"version":"12.9.0-rc.11","channel":"beta","changelog":"<p><strong>Apps</strong></p>\r\n<ul>\r\n<li>Improves stability of automatic app updates.</li>\r\n</ul>"},{"version":"12.9.0-rc.10","channel":"beta","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Minor bug fixes and improvements.</li>\r\n<li>Updates translations.</li>\r\n</ul>"},{"version":"12.9.0-rc.9","channel":"beta","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Improves memory usage diagnostics.</li>\r\n</ul>\r\n<p><strong>Flow</strong></p>\r\n<ul>\r\n<li>Adds Flow card triggers for boolean capabilities with a duration, e.g. \"When device is turned on for 5 minutes\".</li>\r\n</ul>"},{"version":"12.9.0-rc.5","channel":"beta","changelog":"<p><strong>Apps</strong></p>\r\n<ul>\r\n<li>Reverts increased allowed memory usage per app.</li>\r\n<li>Improves handling of apps that use excessive memory.</li>\r\n</ul>"},{"version":"12.9.0-rc.3","channel":"beta","changelog":"<p><strong>Apps</strong></p>\r\n<ul>\r\n<li>Increases allowed memory usage per app.</li>\r\n<li>Increases allowed duration of exceeding CPU usage limit.</li>\r\n<li>Update Node.js version to v22.20.0.</li>\r\n<li>Fixes an issue with auto-updating apps that could result in the app being uninstalled.</li>\r\n</ul>\r\n<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Update Node.js version to v22.20.0.</li>\r\n<li>Fixes an issue that would cause disabled users to not be excluded from presence tracking.</li>\r\n</ul>\r\n<p><strong>Energy</strong></p>\r\n<ul>\r\n<li>Fixes an issue with storing Electricity Total and Solar Generated power in Energy reports.</li>\r\n</ul>\r\n<p><strong>Matter</strong></p>\r\n<ul>\r\n<li>Fixes an issue where changing the dim level of a light would also change the color temperature.</li>\r\n</ul>"},{"version":"12.8.2","channel":"stable","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Minor bug fixes and improvements.</li>\r\n<li>Updates translations.</li>\r\n</ul>"},{"version":"12.8.1","channel":"stable","changelog":"<p><strong>Flow</strong></p>\r\n<ul>\r\n<li>Adds Flow card triggers for boolean capabilities with a duration, e.g. \"When device is turned on for 5 minutes\".</li>\r\n</ul>\r\n<p><strong>Apps</strong></p>\r\n<ul>\r\n<li>Improves handling of apps that use excessive memory.</li>\r\n</ul>\r\n<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Improves memory usage diagnostics.</li>\r\n</ul>"},{"version":"12.8.0","channel":"stable","changelog":"<p><strong>Local Users</strong></p>\r\n<p>Introducing support for local users. You can now access the Homey Web App directly via your Homey’s local IP address. To enable this, visit https://my.homey.app/settings/system/family and enable a local user from the context menu. Once enabled, open your Homey’s IP address in a browser to log in locally.</p>\r\n<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Updates translations.</li>\r\n<li>Adds support for local users.</li>\r\n</ul>\r\n<p><strong>Energy Dongle</strong></p>\r\n<ul>\r\n<li>Adds support for Slovenian data frames.</li>\r\n<li>Adds setting to switch high and low tariff capabilities.</li>\r\n<li>Fixes an issue where a warning would show up after receiving a valid data frame.</li>\r\n</ul>\r\n<p><strong>Matter</strong></p>\r\n<ul>\r\n<li>Fixes an issue where color loop commands were send to device's that don't support this.</li>\r\n<li>Fixes an issue where Shelly 2PM Gen4 devices didn't work correctly.</li>\r\n<li>Fixes an issue where some Matter Bridges would become unavailable.</li>\r\n</ul>"},{"version":"12.7.1-rc.10","channel":"beta","changelog":"<p><strong>Core</strong></p>\n<ul>\n<li>Updated locales.</li>\n</ul>"},{"version":"12.7.1-rc.9","channel":"beta","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Updated locales.</li>\r\n</ul>"},{"version":"12.7.1-rc.8","channel":"beta","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Updates translations.</li></ul>\r\n<p><strong>Energy Dongle</strong></p>\r\n<ul>\r\n<li>Adds support for Slovenian data frames.</li>\r\n<li>Adds setting to switch high and low tariff capabilities.</li>\r\n<li>Fixes an issue where a warning would show up after receiving a valid data frame.</li>\r\n</ul>\r\n<p><strong>Matter</strong></p>\r\n<ul>\r\n<li>Fixes an issue where color loop commands were send to devices that don't support this.</li>\r\n<li>Fixes an issue where Shelly 2PM Gen4 devices didn't work correctly.</li>\r\n<li>Fixes an issue where some Matter Bridges would become unavailable.</li>\r\n</ul>"},{"version":"12.7.0","channel":"stable","changelog":"<p><strong>Camera Streaming</strong></p>\r\n<ul>\r\n<li>Adds support for video streaming. This feature lets Homey users view their cameras live in the Homey app and on Homey Dashboards. <a href=\"https://apps.developer.homey.app/advanced/videos\">Get started in the docs</a>.</li>\r\n</ul>\r\n<p><strong>Matter</strong></p>\r\n<ul>\r\n<li>Adds support for migrating Matter devices when a new cluster is added.</li>\r\n<li>Adds support for setting the duration parameter on dim level, color and color temperature Flow cards.</li>\r\n<li>Adds support for color looping of lights (when the device supports this).</li>\r\n<li>Adds support for configuring the on/off transition time.</li>\r\n<li>Adds support for configuring the on/off state after a device has lost power.</li>\r\n<li>Adds support for configuring a temperature offset for thermostats.</li>\r\n<li>Adds support for configuring delays for occupancy sensors.</li>\r\n<li>Adds more flow cards for buttons and switches (when the device supports this).</li>\r\n<li>Adds support for devices that use the same cluster multiple times.</li>\r\n<li>Adds support for door fault errors of locks.</li>\r\n<li>Adds support for inverting the motor direction of blinds.</li>\r\n<li>Adds support for repairing Matter devices.</li>\r\n<li>Adds support for Matter developer tools.</li>\r\n<li>Adds correct device class for smoke alarms.</li>\r\n<li>Adds support for simultaneous up/down/stop and exact positioning controls for window coverings.</li>\r\n<li>Improves naming of buttons and switches.</li>\r\n<li>Fixes an issue where devices would stop energy measurement updates in some cases.</li>\r\n<li>Fixes an issue where Celsius to Fahrenheit conversion wasn't done correctly.</li>\r\n</ul>\r\n<p><strong>Zigbee</strong></p>\r\n<ul>\r\n<li>Fixes an issue where the last seen property of devices is not always up-to-date.</li>\r\n</ul>\r\n<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Updates translations.</li>\r\n<li>Adds timeline notifications for app updates when auto-updates are disabled.</li>\r\n<li>Fixes an issue where the \"Every X minutes/seconds\" Flow card would accept decimal numbers as parameter.</li>\r\n</ul>"},{"version":"12.7.0-rc.5","channel":"beta","changelog":"<p><strong>Matter</strong></p><ul><li><p>Adds support for simultaneous up/down/stop controls and exact positioning for window coverings.</p></li><li><p>Adds correct device class for smoke alarms.</p></li><li><p>Fixes an issue where water leak sensors would have inverted state.</p></li><li><p>Fixes an issue where Celsius to Fahrenheit conversion wasn't done correctly.</p></li><li><p>Fixes an issue where unoccupied to occupied delay setting wasn't set correctly for motion sensors.</p></li></ul><p><strong>Core</strong></p><ul><li><p>Updates Translations.</p></li></ul>"},{"version":"12.7.0-rc.2","channel":"beta","changelog":"<p><strong>Matter</strong></p><ul><li><p>Adds support for migrating Matter devices when a new cluster is added.</p></li><li><p>Adds support for setting the duration parameter on dim level, color and color temperature Flow cards.</p></li><li><p>Adds support for color looping of lights (when the device supports this).</p></li><li><p>Adds support for configuring the on/off transition time.</p></li><li><p>Adds support for configuring the on/off state after a device has lost power.</p></li><li><p>Adds support for configuring a temperature offset for thermostats.</p></li><li><p>Adds support for configuring delays for occupancy sensors.</p></li><li><p>Adds more flow cards for buttons and switches (when the device supports this).</p></li><li><p>Adds support for devices that use the same cluster multiple times.</p></li><li><p>Adds support for door fault errors of locks.</p></li><li><p>Adds support for inverting the motor direction of blinds.</p></li><li><p>Adds support for repairing Matter devices.</p></li><li><p>Adds support for Matter developer tools.</p></li><li><p>Improves naming of buttons and switches.</p></li><li><p>Fixes an issue where devices would stop energy measurement updates in some cases.</p></li></ul><p><strong>Zigbee</strong></p><ul><li><p>Fixes an issue where the last seen property of devices is not always up-to-date.</p></li></ul><p><strong>Core</strong></p><ul><li><p>Fixes an issue where the \"Every X minutes/seconds\" Flow card would accept decimal numbers as parameter.</p></li><li><p>Adds timeline notifications for app updates when auto-updates are disabled.</p></li><li><p>Updates translations.</p></li></ul>"},{"version":"12.6.1","channel":"stable","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Updates translations.</li>\r\n<li>Fixes an issue when setting up Homey Pro with an unsupported language.</li>\r\n</ul>\r\n<p><strong>Alarms</strong></p>\r\n<ul>\r\n<li>Fixes an issue with rescheduling alarms after a location change which might have changed Homey's system time.</li>\r\n</ul>"},{"version":"12.6.1-rc.3","channel":"beta","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Updates translations.</li>\r\n<li>Fixes an issue when setting up Homey Pro with an unsupported language.</li>\r\n</ul>\r\n<p><strong>Alarms</strong></p>\r\n<ul>\r\n<li>Fixes an issue with rescheduling alarms after a location change which might have changed Homey's system time.</li>\r\n</ul>"},{"version":"12.6.0","channel":"stable","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Updates translations.</li>\r\n</ul>\r\n<p><strong>Energy</strong></p>\r\n<ul>\r\n<li>Adds new Flow cards based on dynamic electricity prices.</li>\r\n<li>Allows EV chargers as possible Top Consumers.</li>\r\n</ul>"},{"version":"12.6.0-rc.6","channel":"beta","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Updates translations.</li>\r\n</ul>\r\n<p><strong>Energy</strong></p>\r\n<ul>\r\n<li>Adds new Flow cards based on dynamic electricity prices.</li>\r\n<li>Allows EV chargers as possible Top Consumers.</li>\r\n</ul>"},{"version":"12.5.3","channel":"stable","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Security update.</li>\r\n<li>Updates translations.</li>\r\n</ul>\r\n<p><strong>Apps</strong></p>\r\n<ul>\r\n<li>Improves handling of downloading apps.</li>\r\n</ul>\r\n<p><strong>Flow</strong></p>\r\n<ul>\r\n<li>Fixes rescheduling time based Flows after moving to a new timezone.</li>\r\n</ul>"},{"version":"12.5.3-rc.5","channel":"beta","changelog":"<p><strong>Flow</strong></p>\r\n<ul>\r\n<li>Fixes rescheduling time based Flows after moving to a new timezone.</li>\r\n</ul>"},{"version":"12.5.3-rc.4","channel":"beta","changelog":"<p><strong>Core</strong></p><ul><li>Security update.</li><li>Updates translations.</li></ul><p><strong>Apps</strong></p><ul><li>Improves handling of downloading apps.</li></ul>"},{"version":"12.5.2","channel":"stable","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Updates translations.</li>\r\n<li>Fixes an issue that caused users to be unable to exclude/include devices from Google Assistant and Amazon Alexa.</li>\r\n</ul>\r\n<p><strong>Z-Wave</strong></p>\r\n<ul>\r\n<li>Fixes an issue that prevented adding Shelly Wave Motion, H&amp;T and Dimmer LR devices.</li>\r\n</ul>\r\n<p><strong>Flow</strong></p>\r\n<ul>\r\n<li>Adds built-in Flow cards for number capabilities \"when value becomes greater than X for Y minutes/seconds\" and \"when value becomes less than X for Y minutes/seconds\".</li>\r\n<li>Adds Flow card that triggers on multiple days of the week.</li>\r\n<li>Adds Flow card that triggers on multiple days of the week at a specific time.</li>\r\n<li>Fixes an issue with migrating sunrise/sunset Flow cards from Homey Pro (2016—2019).</li>\r\n</ul>\r\n<p><strong>Insights</strong></p>\r\n<ul>\r\n<li>Stability improvements.</li>\r\n</ul>"},{"version":"12.5.2-rc.3","channel":"beta","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Updates translations.</li>\r\n</ul>"},{"version":"12.5.2-rc.2","channel":"beta","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Updates translations.</li>\r\n<li>Fixes an issue that caused users to be unable to exclude/include devices from Google Assistant and Amazon Alexa.</li>\r\n</ul>\r\n<p><strong>Z-Wave</strong></p>\r\n<ul>\r\n<li>Fixes an issue that prevented adding Shelly Wave Motion, H&amp;T and Dimmer LR devices.</li>\r\n</ul>\r\n<p><strong>Flow</strong></p>\r\n<ul>\r\n<li>Adds Flow card that triggers on multiple days of the week at a specific time.</li>\r\n<li>Adds built-in Flow cards for number capabilities \"when value becomes greater than X for Y minutes/seconds\" and \"when value becomes less than X for Y minutes/seconds\".</li>\r\n<li>Adds Flow card that triggers on multiple days of the week.</li>\r\n<li>Fixes an issue with migrating sunrise/sunset Flow cards from Homey Pro (2016—2019).</li>\r\n</ul>\r\n<p><strong>Insights</strong></p>\r\n<ul>\r\n<li>Stability improvements.</li>\r\n</ul>"},{"version":"12.5.1","channel":"stable","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Updates translations.</li>\r\n</ul>\r\n<p><strong>Apps</strong></p>\r\n<ul>\r\n<li>Improves diagnostic capabilities when app install fails.</li>\r\n</ul>\r\n<p><strong>Energy Dongle</strong></p>\r\n<ul>\r\n<li>Fixes an issue where DSMR 1/2/3 meters wouldn’t update total energy imported and exported.</li>\r\n</ul>\r\n<p><strong>Matter</strong></p>\r\n<ul>\r\n<li>Improves device pairing by allowing Matter devices to be added even if Homey cannot read all required data from them.</li>\r\n<li>Improves support for Matter Bridges by creating a device for each newly added bridge. (Only for newly added bridges.)</li>\r\n<li>Improves device pairing by setting Homey’s fabric label when a Matter device is added.</li>\r\n</ul>"},{"version":"12.5.1-rc.3","channel":"beta","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Updates translations.</li>\r\n</ul>\r\n<p><strong>Energy Dongle</strong></p>\r\n<ul>\r\n<li>Fixes an issue where DSMR 1/2/3 meters wouldn’t update total energy imported and exported.</li>\r\n</ul>"},{"version":"12.5.1-rc.2","channel":"beta","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Updates translations.</li>\r\n</ul>\r\n<p><strong>Apps</strong></p>\r\n<ul>\r\n<li>Improves diagnostic capabilities when app install fails.</li>\r\n</ul>"},{"version":"12.5.0","channel":"stable","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Updates translations.</li>\r\n</ul>\r\n<p><strong>Apps</strong></p>\r\n<ul>\r\n<li>Adds support for new \"bridge\" device class.</li>\r\n<li>Fixes an issue that could cause an app to fail to install properly.</li>\r\n<li>Fixes auto-focussing on the PIN code input element while adding a device.</li>\r\n</ul>\r\n<p><strong>RF</strong></p>\r\n<ul>\r\n<li>Adds support for cloning 433 MHz remote controls.</li>\r\n</ul>\r\n<p><strong>BLE</strong></p>\r\n<ul>\r\n<li>Fixes an issue that prevented Homey apps from triggering BLE discovery.</li>\r\n</ul>\r\n<p><strong>Matter</strong></p>\r\n<ul>\r\n<li>Fixes an issue where all devices of a Matter Bridge would become unavailable if a single device of the bridge was removed.</li>\r\n<li>Fixes an issue where if a Matter device has a custom capability it couldn’t be added through an app driver.</li>\r\n</ul>\r\n<p><strong>Energy Dongle</strong></p>\r\n<ul>\r\n<li>Fixes an issue where Homey Energy Dongle disconnected prematurely.</li>\r\n<li>Adds support for Smart Meters that use the DLMS/COSEM protocol.</li>\r\n</ul>"},{"version":"12.5.0-rc.4","channel":"beta","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Updates translations.</li>\r\n</ul>\r\n<p><strong>Apps</strong></p>\r\n<ul>\r\n<li>Adds support for new \"bridge\" device class.</li>\r\n<li>Fixes an issue that could cause an app to fail to install properly.</li>\r\n<li>Fixes auto-focussing on the PIN code input element while adding a device.</li>\r\n</ul>\r\n<p><strong>RF</strong></p>\r\n<ul>\r\n<li>Adds support for cloning 433 MHz remote controls.</li>\r\n</ul>\r\n<p><strong>BLE</strong></p>\r\n<ul>\r\n<li>Fixes an issue that prevented Homey apps from triggering BLE discovery.</li>\r\n</ul>\r\n<p><strong>Matter</strong></p>\r\n<ul>\r\n<li>Fixes an issue where all devices of a Matter Bridge would become unavailable if a single device of the bridge was removed.</li>\r\n<li>Fixes an issue where if a Matter device has a custom capability it couldn’t be added through an app driver.</li>\r\n</ul><p><strong>Energy Dongle</strong></p>\r\n<ul>\r\n<li>Fixes an issue where Homey Energy Dongle disconnected prematurely.</li>\r\n<li>Adds support for Smart Meters that use the DLMS/COSEM protocol.</li>\r\n</ul>"},{"version":"12.4.9","channel":"stable","changelog":"<p><strong>Z-Wave</strong></p>\r\n<ul>\r\n<li>Fixes an issue that could cause \"ETIMEDOUT (5:WRITE)\" errors when interacting with Z-Wave devices through a Homey Bridge.</li>\r\n</ul>"},{"version":"12.4.8","channel":"stable","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Updates translations.</li>\r\n<li>Fixes an issue that could cause a missing notification owner name.</li>\r\n</ul>\r\n<p><strong>Apps</strong></p>\r\n<ul>\r\n<li>Fixes an issue that could cause app settings to collide with system settings.</li>\r\n<li>Fixes an issue where apps migrated from Homey Pro (2016–2019) could appear without a name in the timeline settings.</li>\r\n</ul>\r\n<p><strong>BLE</strong></p>\r\n<ul>\r\n<li>Fixes an issue that could cause BLE notifications to be sent to apps too many times.</li>\r\n</ul>\r\n<p><strong>Backups</strong></p>\r\n<ul>\r\n<li>Fixes an issue that could cause a backup to fail with a \"Size mismatch\" error.</li>\r\n</ul>\r\n<p><strong>Matter</strong></p>\r\n<ul>\r\n<li>Adds functionality to mark a Matter device as unavailable when it is offline.</li>\r\n<li>Adds a setting to configure a humidity/temperature offset to humidity/temperature sensors.</li>\r\n<li>Improves connection reliability of Matter bridges with many devices.</li>\r\n<li>Increases Bluetooth scanning during pairing to 30 seconds.</li>\r\n<li>Fixes an issue where not all devices that belong to the same node were deleted.</li>\r\n<li>Fixes an issue where the color temperature of a device couldn’t be set.</li>\r\n<li>Fixes an issue where Homey would take long to reconnect to a device if it has been offline.</li>\r\n</ul>\r\n<p><strong>Energy</strong></p>\r\n<ul>\r\n<li>Fixes an issue that in certain cases could lead to strange power usage graphs in the Energy-tab.</li>\r\n<li>Fixes an issue where energy properties might not be correctly applied to a device in certain scenarios.</li>\r\n</ul>\r\n<p><strong>Energy Dongle</strong></p>\r\n<ul>\r\n<li>Decreases the sensitivity for sending phase load limit notifications.</li>\r\n</ul>"},{"version":"12.4.8-rc.4","channel":"beta","changelog":"<p><strong>Matter</strong></p>\r\n<ul>\r\n<li>Fixes an issue with configuring temperature offset in Fahrenheit.</li>\r\n</ul>"},{"version":"12.4.8-rc.3","channel":"beta","changelog":"<p><strong>Core</strong></p><ul><li>Updates translations.</li><li>Fixes an issue that could cause a missing notification owner name.</li></ul><p><strong>Apps</strong></p><ul><li>Fixes an issue that could cause app settings to collide with system settings.</li><li>Fixes an issue where apps migrated from Homey Pro (2016–2019) could appear without a name in the timeline settings.</li></ul><p><strong>BLE</strong></p><ul><li>Fixes an issue that could cause BLE notifications to be sent to apps too many times.</li></ul><p><strong>Backups</strong></p><ul><li>Fixes an issue that could cause a backup to fail with a \"Size mismatch\" error.</li></ul><p><strong>Matter</strong></p><ul><li>Adds functionality to mark a Matter device as unavailable when it is offline.</li><li>Adds a setting to configure a humidity/temperature offset to humidity/temperature sensors.</li><li>Improves connection reliability of Matter bridges with many devices.</li><li>Increases Bluetooth scanning during pairing to 30 seconds.</li><li>Fixes an issue where not all devices that belong to the same node were deleted.</li><li>Fixes an issue where the color temperature of a device couldn’t be set.</li><li>Fixes an issue where Homey would take long to reconnect to a device if it has been offline.</li></ul><p><strong>Energy</strong></p><ul><li>Fixes an issue that in certain cases could lead to strange power usage graphs in the Energy-tab.</li><li>Fixes an issue where energy properties might not be correctly applied to a device in certain scenarios.</li></ul><p><strong>Energy Dongle</strong></p><ul><li>Decreases the sensitivity for sending phase load limit notifications.</li></ul>"},{"version":"12.4.7","channel":"stable","changelog":"<p><strong>Core</strong></p><ul><li><p>Fixes an issue where newly added devices appeared unavailable in the Homey Web App.</p></li></ul>"},{"version":"12.4.6","channel":"stable","changelog":"<p><strong>Energy</strong></p>\r\n<ul>\r\n<li>Fixes an issue that caused some devices to not be included in Energy.</li>\r\n</ul>"},{"version":"12.4.5","channel":"stable","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Updates translations.</li>\r\n<li>Fixes security vulnerability.</li>\r\n</ul>\r\n<p><strong>Apps</strong></p>\r\n<ul>\r\n<li>Fixes an issue that could prevent Homey Pro from installing apps on networks with IPv6 enabled.</li>\r\n</ul>\r\n<p><strong>Devices</strong></p>\r\n<ul>\r\n<li>Improves the list devices view during pairing on larger displays.</li>\r\n</ul>\r\n<p><strong>Energy</strong></p>\r\n<ul>\r\n<li>Updates Apps SDK to support latest Energy properties.</li>\r\n<li>Fixes an issue that could prevent new energy properties being properly applied.</li>\r\n<li>Adds fallback to “meter_power” capability for Home Batteries and EV chargers when “meterPowerImportedCapability” is not set.</li>\r\n</ul>"},{"version":"12.4.5-rc.7","channel":"beta","changelog":"<p><strong>Energy</strong></p>\r\n<ul>\r\n<li>Fixes an issue that could prevent new <code>energy</code> properties being properly applied.</li>\r\n</ul>"},{"version":"12.4.5-rc.6","channel":"beta","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Fixes security vulnerability.</li>\r\n</ul>"},{"version":"12.4.5-rc.5","channel":"beta","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Updates translations.</li>\r\n</ul>"},{"version":"12.4.5-rc.4","channel":"beta","changelog":"<p><strong>Energy</strong></p>\r\n<ul>\r\n<li>Fixes an issue that would not allow to revert back from a \"What's plugged in?\" -&gt; \"battery\"/\"EV charger\".</li>\r\n</ul>"},{"version":"12.4.5-rc.3","channel":"beta","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Updates translations.</li>\r\n</ul>\r\n<p><strong>Apps</strong></p>\r\n<ul>\r\n<li>Fixes an issue that could prevent Homey Pro from installing apps on networks with IPv6 enabled.</li>\r\n</ul>\r\n<p><strong>Devices</strong></p>\r\n<ul>\r\n<li>Improves the list devices view during pairing on larger displays.</li>\r\n</ul>\r\n<p><strong>Energy</strong></p>\r\n<ul>\r\n<li>Updates Apps SDK to support latest Energy properties.</li>\r\n</ul>"},{"version":"12.4.4","channel":"stable","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Updates translations.</li>\r\n<li>Optimizes Homey Pro Mini startup time for faster boot performance.</li>\r\n</ul>\r\n<p><strong>Energy Dongle</strong></p>\r\n<ul>\r\n<li>Fixes an issue where some Landis + Gyr E360 meters wouldn’t work.</li>\r\n<li>Fixes an issue where some Iskra MT382 meters wouldn’t work.</li>\r\n<li>Fixes an issue where the energy usage of the current day was missing.</li>\r\n<li>Adds a setting to disable control data validation.</li>\r\n</ul>\r\n<p><strong>Energy</strong></p>\r\n<ul>\r\n<li>Improves detection of invalid energy consumption measurements.</li>\r\n</ul>\r\n<p><strong>BLE</strong></p>\r\n<ul>\r\n<li>Various fixes and stability improvements.</li>\r\n<li>Fixes an issue that could cause discovery to get stuck.</li>\r\n<li>Improves retries and timeout handling.</li>\r\n<li>Fixes an issue that could occur when multiple discoveries are executed at once.</li>\r\n<li>Fixes an issue with capitalization in peripheral addresses provided to apps.</li>\r\n<li>Fixes an issue that could cause a connect attempt to fail and never complete.</li>\r\n</ul>\r\n<p><strong>RF</strong></p>\r\n<ul>\r\n<li>Fixes for Homey Pro mini compatibility.</li>\r\n</ul>\r\n<p><strong>IR</strong></p>\r\n<ul>\r\n<li>Fixes for Homey Pro mini compatibility.</li>\r\n</ul>"},{"version":"12.4.4-rc.6","channel":"beta","changelog":"<p><strong>Devices</strong></p>\r\n<ul>\r\n<li>Revert fix for improving the list devices view during pairing on larger displays.</li>\r\n</ul>"},{"version":"12.4.4-rc.5","channel":"beta","changelog":"<strong>RF</strong><ul><li>Fixes for Homey Pro mini compatibility.</li></ul><strong>IR</strong><ul><li>Fixes for Homey Pro mini compatibility.</li></ul><strong>Devices</strong><ul><li>Improve the list devices view during pairing on larger displays.</li></ul><strong>Core</strong><ul><li>Optimize Homey Pro mini startup time for faster boot performance.</li></ul>"},{"version":"12.4.4-rc.2","channel":"beta","changelog":"<strong>Core</strong><ul><li>Updates translations.</li></ul><strong>Energy Dongle</strong><ul><li>Fixes an issue where some Landis + Gyr E360 meters wouldn’t work.</li><li>Fixes an issue where some Iskra MT382 meters wouldn’t work.</li><li>Fixes an issue where the energy usage of the current day was missing.</li><li>Adds a setting to disable control data validation.</li></ul><strong>Energy</strong><ul><li>Improves detection of invalid energy consumption measurements.<br><br><strong>BLE</strong></li></ul><ul><li>Various fixes and stability improvements.</li><li>Improves retries and timeout handling.</li><li>Fixes an issue that could cause discovery to get stuck.</li><li>Fixes an issue that could occur when multiple discoveries are executed at once.</li><li>Fixes an issue with capitalization in peripheral addresses provided to apps.</li><li>Fixes an issue that could cause a connect attempt to fail and never complete.</li></ul>"},{"version":"12.4.3","channel":"stable","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Updates translations.</li>\r\n</ul>\r\n<p><strong>RF</strong></p>\r\n<ul>\r\n<li>Fixes an issue that caused a \"Homey Bridge required\" error to be displayed when adding RF devices.</li>\r\n</ul>\r\n<p><strong>IR</strong></p>\r\n<ul>\r\n<li>Fixes an issue that caused a \"Homey Bridge required\" error to be displayed when adding IR devices.</li>\r\n</ul>"},{"version":"12.4.3-rc.1","channel":"beta","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Updates translations.</li>\r\n</ul>\r\n<p><strong>RF</strong></p>\r\n<ul>\r\n<li>Fixes an issue that caused a \"Homey Bridge required\" error to be displayed when adding RF devices.</li>\r\n</ul>\r\n<p><strong>IR</strong></p>\r\n<ul>\r\n<li>Fixes an issue that caused a \"Homey Bridge required\" error to be displayed when adding IR devices.</li>\r\n</ul>"},{"version":"12.4.2","channel":"stable","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Fixes an issue where excluding devices from Google Assistant would disable updates from Homey to Google.</li>\r\n<li>Adds security fixes and improvements.</li>\r\n<li>Fixes vulnerabilities reported by Taejin Jang, Yoonho Kim (LG Electronics, Team VENGAL).</li>\r\n<li>Updates translations.</li>\r\n</ul>\r\n<p><strong>Energy Dongle</strong></p>\r\n<ul>\r\n<li>Fixes an issue where Smart Meters that use encryption wouldn’t report data to Homey.</li>\r\n<li>Adds a warning when no data was received from the Smart Meter for some time.</li>\r\n</ul>\r\n<p><strong>Matter</strong></p>\r\n<ul>\r\n<li>Fixes an issue where bridged devices were incorrectly marked as unavailable.</li>\r\n<li>Fixes an issue where bridges without bridged devices could not be added.</li>\r\n<li>Fixes an issue that could cause additional non-functional devices to be created when adding Matter Dimmer Switches.</li>\r\n<li>Fixes power measuring sockets not reporting data (requires repair of the device).</li>\r\n</ul>\r\n<p><strong>Energy</strong></p>\r\n<ul>\r\n<li>Fixes an issue that could cause removing categories from Energy reports to not work as expected.</li>\r\n</ul>\r\n<p><strong>Satellite</strong></p>\r\n<ul>\r\n<li>Enables Homey Bridge to act as BLE Satellite.</li>\r\n</ul>\r\n<p><strong>BLE</strong></p>\r\n<ul>\r\n<li>Fixes an issue that could cause Homey Pro to crash due to receiving a malformed BLE message.</li>\r\n<li>Fixes a problem where Homey could accidentally disconnect from devices.</li>\r\n<li>Improved how Homey handles devices that are no longer available.</li>\r\n<li>Fixes a problem where Homey could get stuck in a discovery state.</li>\r\n<li>Fixes a problem where BLE availability was not set correctly.</li>\r\n</ul>"},{"version":"12.4.2-rc.8","channel":"beta","changelog":"<p><strong>BLE</strong></p>\r\n<ul>\r\n<li>Fixes a problem where BLE availability was not set correctly.</li>\r\n</ul>"},{"version":"12.4.2-rc.7","channel":"beta","changelog":"<p><strong>BLE</strong></p><ul><li><p>Fixes a problem where Homey could get stuck in a discovery state.</p></li></ul><p><strong>Core</strong></p><ul><li><p>Fixes an issue that prevents renaming of various items (e.g. Devices and Flows).</p></li></ul>"},{"version":"12.4.2-rc.6","channel":"beta","changelog":"<strong>Core</strong><ul><li>Fixes an issue where excluding devices from Google Assistant would disable updates from Homey to Google.</li><li>Adds security fixes and improvements.</li><li>Fixes vulnerabilities reported by Taejin Jang, Yoonho Kim (LG Electronics, Team VENGAL). </li><li>Updates translations.</li></ul><strong>Energy Dongle</strong><ul><li>Fixes an issue where Smart Meters that use encryption wouldn’t report data to Homey.</li><li>Adds a warning when no data was received from the Smart Meter for some time.</li></ul><strong>Matter</strong><ul><li>Fixes an issue where bridged devices were incorrectly marked as unavailable.</li><li>Fixes an issue where bridges without bridged devices could not be added.</li><li>Fixes an issue that could cause additional non-functional devices to be created when adding Matter Dimmer Switches.</li><li>Fixes power measuring sockets not reporting data (requires repair of the device).</li></ul><strong>Energy</strong><ul><li>Fixes an issue that could cause removing categories from Energy reports to not work as expected.</li></ul><strong>Satellite</strong><ul><li>Enables Homey Bridge to act as BLE Satellite.</li></ul><strong>BLE</strong><ul><li>Fixes an issue that could cause Homey Pro to crash due to receiving a malformed BLE message.</li><li>Fixed a problem where Homey could accidentally disconnect from devices.</li><li>Improved how Homey handles devices that are no longer available.</li></ul>"},{"version":"12.4.1","channel":"stable","changelog":"<p><strong>Backups</strong></p>\r\n<ul>\r\n<li>Improves the way backups are created to prevent running out of RAM (this could cause Homey to become unavailable).</li>\r\n</ul>\r\n<p><strong>Matter</strong></p>\r\n<ul>\r\n<li>Listen to external light capability updates.</li>\r\n<li>Fixes an issue with duplicate sub-device names.</li>\r\n<li>Adds translation for \"Remove Matter Node\" maintenance action.</li>\r\n</ul>\r\n<p><strong>Homey Energy Dongle</strong></p>\r\n<ul>\r\n<li>Improves data parsing to better handle corrupted frames without CRC.</li>\r\n<li>Adds device setting to enable local API.</li>\r\n<li>Various fixes and improvements.</li>\r\n</ul>\r\n<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Fixes error in Homey Bridge/Homey Energy Dongle device name translation.</li>\r\n<li>Fixes an issue that would cause the mobile/web app to not known when Homey Pro was done rebooting.</li>\r\n</ul>"},{"version":"12.4.1-rc.2","channel":"beta","changelog":"<strong>Backups</strong><ul><li>Improves the way backups are created to prevent running out of RAM (this could cause Homey to become unavailable).</li></ul><strong>Matter</strong><ul><li>Listen to external light capability updates.</li><li>Fixes an issue with duplicate sub-device names.</li><li>Adds translation for \"Remove Matter Node\" maintenance action.</li></ul><strong>Homey Energy Dongle</strong><ul><li>Improves data parsing to better handle corrupted frames without CRC.</li><li>Adds device setting to enable local API.</li><li>Various fixes and improvements.</li></ul><strong>Core</strong><ul><li>Fixes error in Homey Bridge/Homey Energy Dongle device name translation.</li><li>Fixes an issue that would cause the mobile/web app to not known when Homey Pro was done rebooting.</li></ul>"},{"version":"12.4.0","channel":"stable","changelog":"<p><strong>Z-Wave</strong></p>\r\n<ul>\r\n<li>Adds support for command class thermostat fan mode v5.</li>\r\n</ul>\r\n<p><strong>Energy</strong></p>\r\n<ul>\r\n<li>Various minor improvements and bug fixes.</li>\r\n<li>Don't generate \"low battery\" warnings for home batteries.</li>\r\n</ul>"},{"version":"12.4.0-rc.4","channel":"beta","changelog":"<p><strong>Z-Wave</strong></p><ul><li><p>Adds support for command class thermostat fan mode v5.</p></li></ul><p><strong>Energy</strong></p><ul><li><p>Various minor improvements and bug fixes.</p></li><li><p>Don't generate \"low battery\" warnings for home batteries.</p></li></ul>"},{"version":"12.3.3","channel":"stable","changelog":"<p><strong>Backups</strong></p>\r\n<ul>\r\n<li>Improves the way backups are created which prevents Homey Pro from becoming unresponsive while creating the backup.</li>\r\n</ul>\r\n<p><strong>Apps</strong></p>\r\n<ul>\r\n<li>Fixes an issue that would result in mDNS not picking up IP-address changes.</li>\r\n<li>Fixes an issue that resulted in apps receiving a device's energy property set to <code>null</code> instead of an object.</li>\r\n</ul>\r\n<p><strong>Energy</strong></p>\r\n<ul>\r\n<li>Adds setting to solar panel devices which allows for inverting power measurements.</li>\r\n<li>Fixes an issue where Homey Energy Dongle was not included in Energy reports.</li>\r\n</ul>\r\n<p><strong>Energy Dongle</strong></p>\r\n<ul>\r\n<li>Fixes an issue where a diagnostic report didn’t contain any smart meter data.</li>\r\n<li>Fixes an issue where the total energy imported/exported was not calculated correctly.</li>\r\n<li>Fixes an issue where Kamstrup HAN-P1 Smart Meters wouldn't work with Homey Energy Dongle.</li>\r\n<li>Fixes an issue where data from Kamstrup OMNIA meters would report \"Invalid Header\".</li>\r\n<li>Adds a Flow card that triggers when any of the phases goes above the configured limit.</li>\r\n</ul>\r\n<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Reduces unnecessary mDNS logging.</li>\r\n<li>Fixes an issue that could cause an error while handling mDNS discovery results.</li>\r\n</ul>"},{"version":"12.3.3-rc.5","channel":"beta","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Fixes an issue that could cause an error while handling mDNS discovery results.</li>\r\n</ul>"},{"version":"12.3.3-rc.4","channel":"beta","changelog":"<strong>Backups</strong> <ul><li>Improves the way backups are created which prevents Homey Pro from becoming unresponsive while creating the backup.</li></ul> <strong>Apps</strong> <ul><li>Fixes an issue that would result in mDNS not picking up IP-address changes.</li><li>Fixes an issue that resulted in apps receiving a device’s energy property set to <code>null</code> instead of an object.</li></ul> <strong>Energy</strong> <ul><li>Adds setting to solar panel devices which allows for inverting power measurements.</li><li>Fixes an issue where Homey Energy Dongle was not included in Energy reports.</li></ul> <strong>Energy Dongle</strong> <ul><li>Fixes an issue where a diagnostic report didn’t contain any smart meter data.</li><li>Fixes an issue where the total energy imported/exported was not calculated correctly.</li><li>Fixes an issue where Kamstrup HAN-P1 Smart Meters wouldn’t work with Homey Energy Dongle.</li><li>Fixes an issue where data from Kamstrup OMNIA meters would report “Invalid Header”.</li><li>Adds a Flow card that triggers when any of the phases goes above the configured limit.</li></ul> <strong>Core</strong> <ul><li>Reduces unnecessary mDNS logging.</li></ul>"},{"version":"12.3.2","channel":"stable","changelog":"<p><strong>Matter</strong></p>\r\n<ul>\r\n<li>Fixes an issue that could cause an “Already added” error to show while adding a new Matter device.</li>\r\n</ul>\r\n<p><strong>Setup</strong></p>\r\n<ul>\r\n<li>Fixes an issue that could prevent a user from setting up Homey Pro after disabling Wi-Fi during a previous setup attempt.</li>\r\n</ul>\r\n<p><strong>Satellite</strong></p>\r\n<ul>\r\n<li>Fixes an issue that made a RF device uncontrollable after removing the Satellite that was configured for it.</li>\r\n</ul>\r\n<p><strong>IR</strong></p>\r\n<ul>\r\n<li>Fixes using the correct number of repetitions when controlling an IR device through the “Send a command” Flow card.</li>\r\n</ul>\r\n<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Fixes an issue that could cause error logging when numeric capabilities are set to non-number values (<a href=\"https://github.com/athombv/homey-apps-sdk-issues/issues/331\">GitHub issue</a>).</li>\r\n<li>Fixes an issue that caused changes to the enabled state of a user to not properly sync.</li>\r\n</ul>\r\n<p><strong>Insights</strong></p>\r\n<ul>\r\n<li>Fixes an issue that in certain cases could cause Insights to stop working.</li>\r\n</ul>\r\n<p><strong>Energy</strong></p>\r\n<ul>\r\n<li>Fixes an issue that could cause a Homey app to access an empty Energy object.</li>\r\n</ul>"},{"version":"12.3.2-rc.3","channel":"beta","changelog":"<p><strong>Energy</strong></p>\r\n<ul>\r\n<li>Fixes an issue that could cause a Homey app to access an empty Energy object.</li>\r\n</ul>"},{"version":"12.3.2-rc.2","channel":"beta","changelog":"<strong>Matter</strong><ul><li>Fixes an issue that could cause an “Already added” error to show while adding a new Matter device.</li></ul><strong>Insights</strong><ul><li>Fixes an issue that in certain cases could cause Insights to stop working.</li></ul><strong>Setup</strong><ul><li>Fixes an issue that could prevent a user from setting up Homey Pro after disabling Wi-Fi during a previous setup attempt.</li></ul><strong>Satellite</strong><ul><li>Fixes an issue that made a RF device uncontrollable after removing the Satellite that was configured for it.</li></ul><strong>IR</strong><ul><li>Fixes using the correct number of repetitions when controlling an IR device through the “Send a command” Flow card.</li></ul><strong>Core</strong><ul><li>Fixes an issue that could cause error logging when numeric capabilities are set to non-number values (<a target=\"_blank\" rel=\"noopener noreferrer nofollow\" href=\"https://github.com/athombv/homey-apps-sdk-issues/issues/331\">GitHub issue</a>).</li><li>Fixes an issue that caused changes to the enabled state of a user to not properly sync.</li></ul>"},{"version":"12.3.1","channel":"stable","changelog":"<p><strong>Matter</strong></p>\r\n<ul>\r\n<li>Fixes an issue where dimmer switches are missing the dim controls.</li>\r\n</ul>\r\n<p><strong>RF</strong></p>\r\n<ul>\r\n<li>Retry RF commands through Homey Pro when Satellite is unavailable.</li>\r\n</ul>\r\n<p><strong>Energy</strong></p>\r\n<ul>\r\n<li>Fixes an issue that caused an error message to show when deleting data from Energy reports.</li>\r\n</ul>"},{"version":"12.3.1-rc.2","channel":"beta","changelog":"<p><strong>Matter</strong></p><ul><li><p>Fixes an issue where dimmer switches are missing the dim controls (requires re-adding the device).</p></li></ul><p><strong>RF</strong></p><ul><li><p>Retry RF commands through Homey Pro when Satellite is unavailable.</p></li></ul><p><strong>Energy</strong></p><ul><li><p>Fixes an issue that caused an error message to show when deleting data from Energy reports.</p></li></ul>"},{"version":"12.3.0","channel":"stable","changelog":"<p><strong>Zigbee</strong></p>\r\n<ul>\r\n<li>Fixes an issue that in rare cases could cause Zigbee not to start properly.</li>\r\n<li>Adds ieeeAddress property on ZigBeeNode instance (<a href=\"https://apps-sdk-v3.developer.homey.app/ZigBeeNode.html#ieeeAddress\">developer documentation</a>).</li>\r\n</ul>\r\n<p><strong>Matter</strong></p>\r\n<ul>\r\n<li>Fixes an issue that in rare cases could cause Matter not to start properly.</li>\r\n<li>Adds support for speakers, dish washers, laundry washers, robotic vacuum cleaners, fans, air purifiers, air conditioners, - refrigerators, freezers, video players, smoke CO sensors, air quality sensors, carbon monoxide sensors, carbon dioxide sensors, - nitrogen dioxide sensors, ozone sensors, formaldehyde sensors, PM1 sensors, PM10 sensors, PM2.5 sensors, radon sensors, TVOC sensors and pumps.</li>\r\n<li>Adds support for power measurement.</li>\r\n<li>Adds support for double click actions on buttons.</li>\r\n<li>Fixes an issue where devices wouldn’t pair to certain Wi-Fi networks.</li>\r\n<li>Fixes an issue where the battery status was not shown in certain cases.</li>\r\n<li>Fixes an issue where devices would lose connection in large Matter networks.</li>\r\n<li>Fixes an issue that prevented adding a Zemismart switch.</li>\r\n</ul>\r\n<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Updates translations.</li>\r\n<li>Adds support for <a href=\"https://github.com/athombv/node-homey-lib/blob/develop/assets/device/classes/service.json\">device class \"service\"</a>.</li>\r\n<li>Fixes an issue that could cause Homey Pro to fail to reconnect to the LAN/Wi-Fi network.</li>\r\n<li>Fixes an issue that could cause capability values to be reset to an old value when Homey was restarted by pulling the plug.</li>\r\n</ul>\r\n<p><strong>Moods</strong></p>\r\n<ul>\r\n<li>Fixes an issue that caused Moods to not be properly restored from a Homey Pro (2016—2019) backup.</li>\r\n</ul>\r\n<p><strong>Dashboards</strong></p>\r\n<ul>\r\n<li>Fixes an issue that caused Dashboards to not be properly restored from a Homey Pro (2016—2019) backup.</li>\r\n</ul>\r\n<p><strong>Z-Wave</strong></p>\r\n<ul>\r\n<li>Improves communication stability with S2 devices.</li>\r\n<li>Fixes an issue that could cause associations not to be set on the device properly.</li>\r\n</ul>\r\n<p><strong>Energy</strong></p>\r\n<ul>\r\n<li>Adds support for the renewed Energy tab (beta). Requires Homey mobile app (v9.1.0) on <a href=\"https://testflight.apple.com/join/tA2e9vby\">iOS</a> and <a href=\"https://play.google.com/apps/testing/app.homey\">Android</a>. For more information check the <a href=\"https://support.homey.app/hc/en-us/articles/17382300255772-Testing-the-Homey-Energy-beta\">Knowledge base article</a> on Homey Energy.</li>\r\n<li>Exclude home batteries from the Energy Zone Control as consuming devices.</li>\r\n</ul>\r\n<p><strong>Apps</strong></p>\r\n<ul>\r\n<li>Fixes an issue that could cause \"add device\" events not to be processed properly during a pair session.\r\nAdds support for device icons with path \"/userdata\" (<a href=\"https://apps.developer.homey.app/the-basics/devices/pairing#device-pairing-data\">developer documentation</a>).</li>\r\n</ul>\r\n<p><strong>Insights</strong></p>\r\n<ul>\r\n<li>Fixes an issue that could cause weather temperature and CPU temperature values to be logged with an incorrect unit.</li>\r\n</ul>"},{"version":"12.3.0-rc.10","channel":"beta","changelog":"<p><strong>Core</strong></p><ul><li><p>Updates translations.</p></li></ul><p><strong>Moods</strong></p><ul><li><p>Fixes an issue that caused Moods to not be properly restored from a Homey Pro (2016—2019) backup.</p></li></ul><p><strong>Dashboards</strong></p><ul><li><p>Fixes an issue that caused Dashboards to not be properly restored from a Homey Pro (2016—2019) backup.</p></li></ul><p><strong>Z-Wave</strong></p><ul><li><p>Improves communication stability with S2 devices.</p></li><li><p>Fixes an issue that could cause associations not to be set on the device properly.</p></li></ul><p><strong>Energy</strong></p><ul><li><p>Various minor stability improvements.</p></li><li><p>Improves precision in calculating prices.</p></li></ul>"},{"version":"12.3.0-rc.7","channel":"beta","changelog":"<p><strong>Energy</strong></p><p>We're excited to announce that the Energy tab has returned! Get realtime and historical insights into electricity, gas and water usage as well as solar generation. The new Energy feature in the Homey mobile app (v9.1.0) is now available for testing on both <a target=\"_blank\" rel=\"noopener noreferrer nofollow\" class=\"ProsemirrorEditor-link\" href=\"https://testflight.apple.com/join/tA2e9vby\">iOS</a> and <a target=\"_blank\" rel=\"noopener noreferrer nofollow\" class=\"ProsemirrorEditor-link\" href=\"https://play.google.com/apps/testing/app.homey\">Android</a>.</p><p style=\"text-align: start\">Give it a try and let us know what you think! For more information check the <a target=\"_blank\" rel=\"noopener noreferrer nofollow\" href=\"http://homey.link/kb-homey-energy-beta\">Knowledge base article</a> on Homey Energy.<br><br><strong>Core</strong></p><ul><li><p>Updates translations.</p></li><li><p>Adds support for <a target=\"_blank\" rel=\"noopener noreferrer nofollow\" class=\"ProsemirrorEditor-link\" href=\"https://github.com/athombv/node-homey-lib/blob/develop/assets/device/classes/service.json\">device class \"service\"</a>.</p></li><li><p>Fixes an issue that could cause Homey Pro to fail to reconnect to the LAN/Wi-Fi network.</p></li><li><p>Fixes an issue that could cause capability values to be reset to an old value when Homey was restarted by pulling the plug.</p></li></ul><p><strong>Matter</strong></p><ul><li><p>Fixes an issue that in rare cases could cause Matter not to start properly.</p></li><li><p>Adds support for speakers, dish washers, laundry washers, robotic vacuum cleaners, fans, air purifiers, air conditioners, refrigerators, freezers, video players, smoke CO sensors, air quality sensors, carbon monoxide sensors, carbon dioxide sensors, nitrogen dioxide sensors, ozone sensors, formaldehyde sensors, PM1 sensors, PM10 sensors, PM2.5 sensors, radon sensors, TVOC sensors and pumps.</p></li><li><p>Adds support for power measurement.</p></li><li><p>Adds support for double click actions on buttons.</p></li><li><p>Fixes an issue where devices wouldn’t pair to certain Wi-Fi networks.</p></li><li><p>Fixes an issue where the battery status was not shown in certain cases.</p></li><li><p>Fixes an issue where devices would lose connection in large Matter networks.</p></li><li><p>Fixes an issue that prevented adding a Zemismart switch.</p></li></ul><p><strong>Apps</strong></p><ul><li><p>Fixes an issue that could cause \"add device\" events not to be processed properly during a pair session.</p></li><li><p>Adds support for device icons with path \"/userdata\" (<a target=\"_blank\" rel=\"noopener noreferrer nofollow\" class=\"ProsemirrorEditor-link\" href=\"https://apps.developer.homey.app/the-basics/devices/pairing#device-pairing-data\">developer documentation</a>).</p></li></ul><p><strong>Energy</strong></p><ul><li><p>Exclude home batteries from the Energy Zone Control as consuming devices.</p></li></ul><p><strong>Insights</strong></p><ul><li><p>Fixes an issue that could cause weather temperature and CPU temperature values to be logged with an incorrect unit.</p></li></ul><p><strong>Zigbee</strong></p><ul><li><p>Fixes an issue that in rare cases could cause Zigbee not to start properly.</p></li><li><p>Adds <code>ieeeAddress</code> property on <code>ZigBeeNode</code> instance (<a target=\"_blank\" rel=\"noopener noreferrer nofollow\" class=\"ProsemirrorEditor-link\" href=\"https://apps-sdk-v3.developer.homey.app/ZigBeeNode.html#ieeeAddress\">developer documentation</a>).</p></li></ul>"},{"version":"12.2.1","channel":"stable","changelog":"<p><strong>Energy</strong></p><ul><li><p>Fixes an issue that could result in a device class change only being applied after a restart.</p></li></ul><p><strong>Core</strong></p><ul><li><p>Adds options \"all users\"/\"all present users\"/\"all not present users\" as push message destinations.</p></li></ul><p><strong>Zone</strong></p><ul><li><p>Fixes an issue that could cause zone activity to get stuck in a certain state after removing a device.</p></li><li><p>Adds capabilities \"alarm<em> </em>vibration<em>\",</em> \"alarm occupancy\" and \"alarm presence\" to control Zone Activity (<a target=\"_blank\" rel=\"noopener noreferrer nofollow\" href=\"https://apps.developer.homey.app/the-basics/devices/capabilities#zone-activity-capability-options\">developer documentation</a>).</p></li></ul>"},{"version":"12.2.1-rc.1","channel":"beta","changelog":"<p><strong>Energy</strong></p><ul><li><p>Fixes an issue that could result in a device class change only being applied after a restart.<br></p></li></ul><p><strong>Core</strong></p><ul><li><p>Adds options \"all users\"/\"all present users\"/\"all not present users\" as push message destinations.<br></p></li></ul><p><strong>Zone</strong></p><ul><li><p>Fixes an issue that could cause zone activity to get stuck in a certain state after removing a device.<br></p></li><li><p>Adds capabilities alarm_vibration, alarm_occupancy and alarm_presence to control Zone Activity (developer documentation).</p></li></ul>"},{"version":"12.2.0","channel":"stable","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Updates translations.</li>\r\n<li>Fixes an issue that could cause temperature conversion from Celsius to Fahrenheit to return an invalid value.</li>\r\n<li>Fixes an issue that could cause Homey Pro (Early 2023) to not start properly.</li>\r\n</ul>\r\n<p><strong>Apps</strong></p>\r\n<ul>\r\n<li>Adds new system capabilities (see the <a href=\"https://apps-sdk-v3.developer.homey.app/tutorial-device-capabilities.html\">capability reference</a>).</li>\r\n<li>Adds support for overriding system capabilities (read more in our <a href=\"https://apps.developer.homey.app/upgrade-guides/device-capabilities\">developer documentation</a>).</li>\r\n<li>Changes measure<em>temperature and target</em>temperature system capabilities to show a value rounded to 1 decimal instead of 2.</li>\r\n</ul>\r\n<p><strong>Moods</strong></p>\r\n<ul>\r\n<li>Fixes updating Moods Flow card names when Mood name is changed.</li>\r\n</ul>"},{"version":"12.2.0-rc.3","channel":"beta","changelog":"<p><strong>Core</strong></p><ul><li>Updates translations.</li><li>Fixes an issue that could cause temperature conversion from Celsius to Fahrenheit to return an invalid value.</li></ul><p><strong>Apps</strong></p><ul><li>Changes \"measure_temperature\" and \"target_temperature\" system capabilities to show a value rounded to 1 decimal instead of 2.</li></ul><p><strong>Moods</strong></p><ul><li>Fixes updating Moods Flow card names when Mood name is changed.</li></ul>"},{"version":"12.2.0-rc.2","channel":"beta","changelog":"<p><strong>Apps</strong></p><ul><li>Adds new system capabilities (see the&nbsp;<a href=\"https://apps-sdk-v3.developer.homey.app/tutorial-device-capabilities.html\" rel=\"noopener noreferrer\" target=\"_blank\" style=\"color: rgba(var(--sk_highlight,18,100,163),1);\">capability reference</a>).</li><li>Adds support for overriding system capabilities (read more in our <a href=\"https://apps.developer.homey.app/upgrade-guides/device-capabilities\" rel=\"noopener noreferrer\" target=\"_blank\">developer documentation</a>).</li></ul>"},{"version":"12.1.2","channel":"stable","changelog":"<p><strong>Dashboards</strong></p><ul><li><p>Added option to create transparent app widgets (<a target=\"_blank\" rel=\"noopener noreferrer nofollow\" href=\"https://apps.developer.homey.app/the-basics/widgets#widget.compose.json\">developer documentation</a>).</p></li><li><p>Added option to create a haptic feedback on press events for app widgets (<a target=\"_blank\" rel=\"noopener noreferrer nofollow\" href=\"https://apps.developer.homey.app/the-basics/widgets#homey.hapticfeedback\">developer documentation</a>).</p></li><li><p>Added font scale support for app widgets.</p></li></ul>"},{"version":"12.1.1","channel":"stable","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Fixes an issue that could cause Homey Pro (Early 2023) to not start properly.</li>\r\n</ul>"},{"version":"12.1.1-rc.1","channel":"beta","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Fixes an issue that could cause Homey Pro (Early 2023) to not start properly.</li>\r\n</ul>"},{"version":"12.1.0","channel":"stable","changelog":"<p><strong>Dashboards</strong></p><ul><li>Added support for Homey Dashboards.</li></ul>"},{"version":"12.1.0-rc.2","channel":"beta","changelog":"<p><strong>Core</strong></p><ul><li>Updates translations.</li></ul>"},{"version":"12.0.2","channel":"stable","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Updates translations.</li>\r\n</ul>\r\n<p><strong>Apps</strong></p>\r\n<ul>\r\n<li>Create a notification when installing an app failed due to having too little storage available.</li>\r\n<li>Fixes a white space error in the Norwegian translation of various units.</li>\r\n<li>Fixes an issue that would allow incompatible apps to be installed from the Homey App store.</li>\r\n</ul>\r\n<p><strong>Backups</strong></p>\r\n<ul>\r\n<li>Fixes a crash caused by creating a backup while having too little storage available.</li>\r\n<li>Create a notification when creating a backup failed due to having too little storage available.</li>\r\n</ul>\r\n<p><strong>Flow & Advanced Flow</strong></p>\r\n<ul>\r\n<li>Improves the way rate limits for Flows are calculated which should result in less rate limits.</li>\r\n</ul>"},{"version":"12.0.2-rc.3","channel":"beta","changelog":"<p><strong>Apps</strong></p>\r\n<ul>\r\n<li>Fixes an issue that would allow incompatible apps to be installed from the Homey App store.</li>\r\n</ul>"},{"version":"12.0.2-rc.2","channel":"beta","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Updates translations.</li>\r\n</ul>\r\n<p><strong>Apps</strong></p>\r\n<ul>\r\n<li>Create a notification when installing an app failed due to having too little storage available.</li>\r\n<li>Fixes a white space error in the Norwegian translation of various units.</li>\r\n</ul>\r\n<p><strong>Backups</strong></p>\r\n<ul>\r\n<li>Fixes a crash caused by creating a backup while having too little storage available.</li>\r\n<li>Create a notification when creating a backup failed due to having too little storage available.</li>\r\n</ul>\r\n<p><strong>Flow & Advanced Flow</strong></p>\r\n<ul>\r\n<li>Improves the way rate limits for Flows are calculated which should result in less rate limits.</li>\r\n</ul>"},{"version":"12.0.1","channel":"stable","changelog":"<p><strong>Core</strong></p><ul><li>Updates translations.</li></ul><p><strong>Wi-Fi</strong></p><ul><li>Fixes an issue that caused the Wi-Fi reconnect watchdog to keep running when only using ethernet.</li></ul><p><strong>Apps</strong></p><ul><li>Added support for ECMAScript Modules (see <a href=\"https://apps.developer.homey.app/guides/using-esm-in-homey-apps\" rel=\"noopener noreferrer\" target=\"_blank\">documentation</a>).</li><li>Fixes \"memwarn\" and \"cpuwarn\" app events.</li><li>Fixes an issue that caused a device's UI indicator to be removed when using removeCapability.</li><li>Adds support for enum capability options (see <a href=\"https://apps.developer.homey.app/the-basics/devices/capabilities#enum-capability-options\" rel=\"noopener noreferrer\" target=\"_blank\">documentation</a>).</li><li>Fixes an issue that caused unhandled rejections to be reported as app crashes when app was not installed through the Homey App store.</li></ul><p><strong>Z-Wave</strong></p><ul><li>Fixes an issue with entering raw configuration parameter values.</li></ul>"},{"version":"12.0.1-rc.8","channel":"beta","changelog":"<p><strong>Core</strong></p><ul><li>Updates translations.</li></ul><p><strong>Wi-Fi</strong></p><ul><li>Fixes an issue that caused the Wi-Fi reconnect watchdog to keep running when only using ethernet.</li></ul><p><strong>Apps</strong></p><ul><li>Fixes \"memwarn\" and \"cpuwarn\" app events.</li><li>Fixes an issue that caused a device's UI indicator to be removed when using&nbsp;<code>removeCapability</code>.</li><li>Adds support for enum capability options (see&nbsp;<a href=\"https://apps.developer.homey.app/the-basics/devices/capabilities#enum-capability-options\" rel=\"noopener noreferrer\" target=\"_blank\">documentation</a>).</li><li>Fixes an issue that caused unhandled rejections to be reported as app crashes when app was not installed through the Homey App store.</li></ul><p><strong>Z-Wave</strong></p><ul><li>Fixes an issue with entering raw configuration parameter values.</li></ul>"},{"version":"12.0.0","channel":"stable","changelog":"<p><strong>Core</strong></p><ul><li>Updates translations.</li><li>Adds support for Korean language.</li><li>Fixes an issue that caused a wrong system time in Egypt.</li><li>Fixes origins in the device timeline for Web Api calls and improves them for Flow and Advanced Flow.</li></ul><p><strong>Satellite</strong></p><ul><li>Fixes an issue that could prevent Homey Bridges from being added properly when a Z-Wave firmware is required on the Bridge.</li></ul><p><strong>Zigbee</strong></p><ul><li>Fixes an issue that caused unnecessary communication with devices.</li></ul><p><strong>Apps</strong></p><ul><li>Adds support for new device classes (see <a href=\"https://apps-sdk-v3.developer.homey.app/tutorial-device-classes.html\" rel=\"noopener noreferrer\" target=\"_blank\">developer documentation</a>).</li></ul>"},{"version":"12.0.0-rc.4","channel":"beta","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Updates translations.</li>\r\n</ul>"},{"version":"12.0.0-rc.3","channel":"beta","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Fixes an issue with selecting a new language.</li>\r\n</ul>"},{"version":"12.0.0-rc.2","channel":"beta","changelog":"<p><strong>Core</strong></p><ul><li>Updates translations.</li><li>Fixes an issue that caused a wrong system time in Egypt.</li><li>Fixes origins in the device timeline for Web Api calls and improves them for Flow and Advanced Flow.</li></ul><p><strong>Satellite</strong></p><ul><li>Fixes an issue that could prevent Homey Bridges from being added properly when a Z-Wave firmware update is required on the Bridge.</li></ul><p><strong>Zigbee</strong></p><ul><li>Fixes an issue that caused unnecessary communication with devices.</li></ul><p><strong>Apps</strong></p><ul><li>Adds support for new device classes (see <a href=\"https://apps-sdk-v3.developer.homey.app/tutorial-device-classes.html\" rel=\"noopener noreferrer\" target=\"_blank\">developer documentation</a>).</li></ul>"},{"version":"11.1.2","channel":"stable","changelog":"<p><strong>Core</strong></p><ul><li>Updated translations.</li><li>Improved diagnostics (disk writes).</li><li>Improved performance of fetching devices.</li><li>Fixed an issue that could cause the LED Ring to become red after a while setting up Homey Pro.</li></ul><p><strong>Matter</strong></p><ul><li>Improved certain error messages.</li></ul><p><strong>Z-Wave</strong></p><ul><li>Improves reliability of flashing the Z-Wave chip.</li><li>Fixed an issue that could cause a \"Please wait until Z-Wave is ready\" error message when pairing a Z-Wave device.</li></ul><p><strong>Zigbee</strong></p><ul><li>Improves reliability of flashing the Zigbee chip.</li></ul><p><strong>Insights</strong></p><ul><li>Fixes an issue where Insights would not load in some cases.</li></ul>"},{"version":"11.1.2-rc.4","channel":"beta","changelog":"<p><strong>Setup</strong></p>\r\n<ul>\r\n<li>Fixed an issue that could cause the LED Ring to become red after a sometime while setting up Homey Pro.</li>\r\n</ul>\r\n<p><strong>RF</strong></p>\r\n<ul>\r\n<li>Fixed an issue that could cause RF to become unresponsive due to a \"queue full\" error.</li>\r\n</ul>"},{"version":"11.1.2-rc.3","channel":"beta","changelog":"<p><strong>Core</strong></p><ul><li>Updated translations.</li></ul><p><strong>RF</strong></p><ul><li>Fixed an issue that could cause errors to occur when controlling RF devices (error message would include “invalid peripheral : Peripheral SWD”).</li></ul>"},{"version":"11.1.2-rc.2","channel":"beta","changelog":"<p><strong>Core</strong></p><ul><li>Improved diagnostics.</li><li>Improved performance of fetching devices.</li></ul><p><strong>Insights</strong></p><ul><li>Fixes an issue where Insights would not load in some cases.</li></ul><p><strong>Matter</strong></p><ul><li>Improved certain error messages.</li></ul><p><strong>Zigbee</strong></p><ul><li>Improves reliability of flashing the Zigbee chip.</li></ul><p><strong>Z-Wave</strong></p><ul><li>Fixed an issue that could cause a \"Please wait until Z-Wave is ready\" error message when pairing a Z-Wave device.</li><li>Improves reliability of flashing the Z-Wave chip.</li></ul>"},{"version":"11.1.1","channel":"stable","changelog":"<p><strong>Core</strong></p><ul><li>Updated translations.</li><li>Added improved diagnostics.</li><li>Improved stability of connection with coprocessor.</li><li>Improved stability of OTA update download.</li></ul><p><strong>Zone</strong></p><ul><li>Include onoff subcapabilities when turning on or off all devices in a Zone using Zone Flow Cards.</li></ul><p><strong>Moods</strong></p><ul><li>Added origin in device timeline.</li></ul>"},{"version":"11.1.1-rc.4","channel":"beta","changelog":"<p><strong>Core</strong></p><ul><li>Updated translations.</li><li>Improved stability of connection with coprocessor.</li><li>Improved stability of OTA update download.</li><li>Added improved diagnostics.</li></ul><p><strong>Zone</strong></p><ul><li>Include onoff subcapabilities when turning on or off all devices in a Zone using Zone Flow Cards.</li></ul><p><strong>Moods</strong></p><ul><li>Added origin in device timeline.</li></ul>"},{"version":"11.1.0","channel":"stable","changelog":"<p><strong>Core</strong></p><ul><li>Updated confirm notifications to use yes/no instead of icons.</li><li>Fixes an issue where device names wouldn't be synchronised with the Google Assistent integration.</li><li>Fixes an issue that could cause the Google Assistant integration to stop syncing.</li><li>Fixes an issue where the \"Every x months\" Flow card would trigger a day too early.</li><li>Fixes an issue where Insights would not display temperature values in Fahrenheit correctly.</li><li>Fixes an issue where the \"The season is\" Flow card would not take the user's hemisphere into account.</li><li>Fixes an issue with certain button capabilities that could cause the button not to work as expected (e.g. muting the volume).</li><li>Fixes an issue where Homey Pro was missing its cloud id after restoring a back-up.</li><li>Fixes an issue where capabilities would be outdated after a reboot.</li><li>Fixes an issue where devices showed as unavailable after they were added using the Homey Web App.</li><li>Updated translations.</li></ul><p><strong>Apps</strong></p><ul><li>Fixes an issue where setting uiComponent to null would not work.</li></ul><p><strong>Matter</strong></p><ul><li>Adds support for creating Apps with Matter drivers. Homey Apps can now add pairing instructions and icons for Matter devices.</li><li>Fixes an issue where a bridged Matter device would incorrectly remain unavailable.</li><li>Fixes an issue where new devices added to a Matter bridge would not be added to Homey Pro.</li><li>Fixes an issue where setting the dim value of a light to 0% would not completely turn off the light.</li><li>Fixes an issue that could cause error 0x0704 when adding a Matter device.</li><li>Removed beta status.</li></ul><p><strong>Wi-Fi</strong></p><ul><li>Improved Wi-Fi connectivity when using band steering.</li><li>Various stability improvements.</li></ul><p><strong>Z-Wave</strong></p><ul><li>Adds \"Request Official App\" view after adding an unknown Z-Wave device.</li></ul><p><strong>Zigbee</strong></p><ul><li>Adds \"Request Official App\" view after adding an unknown Zigbee device.</li><li>Fixes an error when setting the color of an Unknown Zigbee device.</li><li>Fixes an issue where end devices could not rejoin the Zigbee network.</li><li>Fixes a crash that could occur when a Zigbee device would rejoin.</li><li>Decreased the number of messages that will be sent to devices which are currently unreachable.</li></ul>"},{"version":"11.1.0-rc.3","channel":"beta","changelog":"<p><strong>Core</strong></p><ul><li>Updated confirm notifications to use yes/no instead of icons.</li><li>Fixes an issue where device names wouldn't be synchronised with the Google Assistent integration.</li><li>Fixes an issue that could cause the Google Assistant integration to stop syncing.</li><li>Fixes an issue where the \"Every x months\" Flow card would trigger a day too early.</li><li>Fixes an issue where Insights would not display temperature values in Fahrenheit correctly.</li><li>Fixes an issue where the \"The season is\" flow card would not take the user's hemisphere into account.</li><li>Fixes an issue with certain button capabilities that could cause the button not to work as expected (e.g. muting the volume).</li><li>Fixes an issue where Homey Pro was missing its cloud id after restoring a back-up.</li><li>Updated translations.</li></ul><p><strong>Apps</strong></p><ul><li>Fixes an issue where setting uiComponent to null would not work.</li></ul><p><strong>Matter</strong></p><ul><li>Adds support for creating Apps with Matter drivers without custom functionality. Homey Apps can now add pairing instructions and icons for Matter devices.</li></ul><p><strong>Wi-Fi</strong></p><ul><li>Improved Wi-Fi connectivity when using band steering.</li><li>Various stability improvements.</li></ul><p><strong>Z-Wave</strong></p><ul><li>Adds \"Request Official App\" view after adding an unknown Z-Wave device.</li></ul><p><strong>Zigbee</strong></p><ul><li>Adds \"Request Official App\" view after adding an unknown Zigbee device.</li><li>Fixes an error when setting the color of an Unknown Zigbee device.</li></ul>"},{"version":"11.0.1-rc.2","channel":"beta","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Fixes an issue that would cause Homey to use the wrong temperature unit.</li>\r\n</ul>"},{"version":"11.0.1-rc.1","channel":"beta","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Fixes an issue where capabilities would be outdated after a reboot.</li>\r\n<li>Fixes an issue where devices could show as unavailable after they were added using the Homey Web App.</li>\r\n</ul>\r\n<p><strong>Matter</strong></p>\r\n<ul>\r\n<li>Fixes an issue where a bridged Matter device would incorrectly remain unavailable.</li>\r\n<li>Fixes an issue where new devices added to a Matter bridge would not be added to Homey Pro.</li>\r\n<li>Fixes an issue where setting the dim value of a light to 0% would not completely turn off the light.</li>\r\n<li>Fixes an issue that could cause error 0x0704 when adding a Matter device.</li>\r\n<li>Removed beta status.</li>\r\n</ul>\r\n<p><strong>Zigbee</strong></p>\r\n<ul>\r\n<li>Fixes an issue where end devices could not rejoin the Zigbee network.</li>\r\n<li>Fixes a Zigbee crash that could occur when a Zigbee device would rejoin.</li>\r\n<li>Decreased the number of messages that will be sent to devices which are currently unreachable.</li>\r\n</ul>"},{"version":"11.0.0","channel":"stable","changelog":"<p><strong>Introducing Moods</strong></p><p>With Moods, you can create and save your own lighting setups effortlessly.</p><p>In order to use Moods, Mobile App version 8.2.0 or higher is required. You can get this public beta via TestFlight (iOS) or the Google Play Store (Android) (<a href=\"https://support.homey.app/hc/en-us/articles/12199889665308-Enabling-experimental-updates\" rel=\"noopener noreferrer\" target=\"_blank\">learn more</a>).</p><p>Note: there is an issue related to Zigbee that is present since v10.3.0. Some Zigbee end-devices may experience difficulties reconnecting to Homey Pro after a reboot or firmware update. Also, in some cases Zigbee might become unavailable due to this issue. We are working together with Silicon Labs to resolve this issue as soon as possible. A fix is currently being tested internally and will be released in a future firmware update. We understand the frustration this may cause and apologize for any inconvenience it may bring to your smart home experience.</p>"},{"version":"10.3.5","channel":"stable","changelog":"<p><strong>Core</strong></p><ul><li>Updates translations.</li></ul><p>Note: there is an issue related to Zigbee that is present since v10.3.0. Some Zigbee end-devices may experience difficulties reconnecting to Homey Pro after a reboot or firmware update. Also, in some cases Zigbee might become unavailable due to this issue. We are working together with Silicon Labs to resolve this issue as soon as possible. A fix is currently being tested internally and will be released in an upcoming firmware update. We understand the frustration this may cause and apologize for any inconvenience it may bring to your smart home experience.</p>"},{"version":"10.3.5-rc.1","channel":"beta","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Updates translations.</li>\r\n</ul>"},{"version":"10.3.4","channel":"stable","changelog":"<p><strong>Core</strong></p><ul><li>Improves various translations.</li></ul><p><strong>Matter</strong></p><ul><li>Fixes an issue that could cause error 0x00db making a Matter device unavailable after a restart.</li><li>Fixes an issue that caused capability timestamps to represent the moment it was last updated, when it should represent the moment last changed.</li></ul><p>Note: there is an issue related to Zigbee that is present since v10.3.0. Some Zigbee end-devices may experience difficulties reconnecting to Homey Pro after a reboot or firmware update. Also, in some cases Zigbee might become unavailable due to this issue. We are working together with Silicon Labs to resolve this issue as soon as possible. We expect to have a fix in the next firmware update. We understand the frustration this may cause and apologize for any inconvenience it may bring to your smart home experience.</p>"},{"version":"10.3.4-rc.2","channel":"beta","changelog":"<p><strong>Core</strong></p><ul><li>Improves various translations.</li></ul><p><strong>Matter</strong></p><ul><li>Fixes an issue that could cause error 0x00db making a Matter device unavailable after a restart.</li><li>Fixes an issue that caused capability timestamps to represent the moment it was last updated, when it should represent the moment last changed.</li></ul>"},{"version":"10.3.3","channel":"stable","changelog":"<p><strong>Core</strong></p><ul><li>Fixed an issue that could cause Homey Pro (Early 2023) to show a white spinning LED ring indefinitely when booting without an active internet connection.</li><li>Fixes an issue that could result in errors when accessing your Homey Pro (Early 2023) on the local network.</li><li>Improves the way Homey Pro (re-) connects to the cloud.</li><li>Diagnostic improvements.</li></ul><p>Note: there is an issue related to Zigbee that is present since v10.3.0. Some Zigbee end-devices may experience difficulties reconnecting to Homey Pro after a reboot or firmware update. Also, in some cases Zigbee might become unavailable due to this issue. We are working together with Silicon Labs to resolve this issue as soon as possible. We understand the frustration this may cause and apologize for any inconvenience it may bring to your smart home experience.</p>"},{"version":"10.3.3-rc.4","channel":"beta","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Fixes an issue that could result in errors when accessing your Homey Pro (Early 2023) on the local network.</li>\r\n<li>Diagnostic improvements.</li>\r\n</ul>"},{"version":"10.3.3-rc.1","channel":"beta","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Fixed an issue that could cause Homey Pro (Early 2023) to show a white spinning LED ring indefinitely when booting without an active internet connection.</li>\r\n<li>Improves the way Homey Pro (re-)connects to the cloud.</li>\r\n</ul>"},{"version":"10.3.2","channel":"stable","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Fixes an issue where if both Ethernet and Wi-Fi are connected Homey Pro could experience connectivity issues.</li>\r\n<li>Fixes an issue where weather data would not update after the region of Homey Pro changed.</li>\r\n<li>Fixes an issue that caused a delay in setting the capability value of a Virtual Button device.</li>\r\n<li>Fixes an issue that could return an invalid error when connecting remotely.</li>\r\n<li>Fixes an issue where the image of a virtual IP camera could not be send as a push message to an Android device.</li>\r\n<li>Updates translations.</li>\r\n</ul>\r\n<p><strong>Back-ups</strong></p>\r\n<ul>\r\n<li>Fixes an issue where restoring a back-up could cause Homey Pro to go into set-up mode after a reboot.</li>\r\n</ul>\r\n<p><strong>Z-Wave</strong></p>\r\n<ul>\r\n<li>Fixes an issue where Z-Wave would not work in Malaysia.</li>\r\n<li>Fixes an issue where Z-Wave errors were not translated for basic Z-Wave devices.</li>\r\n<li>Fixes an issue that caused Satellites to not join the Z-Wave network as router when using the region override setting.</li>\r\n</ul>\r\n<p><strong>Zones</strong></p>\r\n<ul>\r\n<li>Fixes an issue that could cause delays in updating zone activity.</li>\r\n<li>Fixes an issue that could cause zone activity Flow cards to trigger multiple times for a single change in activity.</li>\r\n</ul>"},{"version":"10.3.2-rc.2","channel":"beta","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Fixes an issue that could return an invalid error when connecting remotely.</li>\r\n<li>Fixes an issue where the image of a virtual IP camera could not be send as a push message to an Android device.</li>\r\n<li>Updates translations.</li>\r\n</ul>"},{"version":"10.3.2-rc.1","channel":"beta","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Fixes an issue where if both Ethernet and Wi-Fi are connected Homey Pro could experience connectivity issues.</li>\r\n<li>Fixes an issue where weather data would not update after the region of Homey Pro changed.</li>\r\n<li>Fixes an issue that caused a delay in setting the capability value of a Virtual Button device.</li>\r\n</ul>\r\n<p><strong>Back-ups</strong></p>\r\n<ul>\r\n<li>Fixes an issue where restoring a back-up could cause Homey Pro to go into set-up mode after a reboot.</li>\r\n</ul>\r\n<p><strong>Z-Wave</strong></p>\r\n<ul>\r\n<li>Fixes an issue where Z-Wave would not work in Malaysia.</li>\r\n<li>Fixes an issue where Z-Wave errors were not translated for basic Z-Wave devices.</li>\r\n<li>Fixes an issue that caused Satellites to not join the Z-Wave network as router when using the region override setting.</li>\r\n</ul>\r\n<p><strong>Zones</strong></p>\r\n<ul>\r\n<li>Fixes an issue that could cause delays in updating zone activity.</li>\r\n<li>Fixes an issue that could cause zone activity Flow cards to trigger multiple times for a single change in activity.</li>\r\n</ul>"},{"version":"10.3.1","channel":"stable","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Fixes an issue where Apps would not receive install and uninstall events.</li>\r\n<li>Fixes an issue where Apps would always enable auto updates after an update.</li>\r\n<li>Fixes an issue where time would not sync correctly.</li>\r\n<li>Fixes an issue where images would not be shown in a camera view.</li>\r\n<li>Fixes an issue where a cloud back-up could fail temporarily.</li>\r\n<li>Fixes an issue where permissions for app-to-app communication was not checked correctly.</li>\r\n</ul>\r\n<p><strong>Zigbee</strong></p>\r\n<ul>\r\n<li>Fixes an issue where devices were not made available again when they rejoined.</li>\r\n<li>Fixes an issue where errors were not shown in the repair screens.</li>\r\n</ul>\r\n<p><strong>Z-Wave</strong></p>\r\n<ul>\r\n<li>Improved start-up behavior.</li>\r\n<li>Improved flashing reliability.</li>\r\n</ul>\r\n<p><strong>RF & IR</strong></p>\r\n<ul>\r\n<li>Adds support for receiving 433 MHz messages via a Satellite.</li>\r\n<li>Fixes an issue that caused Infrared &amp; RF signal repetitions not to work as expected. </li>\r\n</ul>"},{"version":"10.3.1-rc.2","channel":"beta","changelog":"<p><strong>Core</strong></p><ul><li>Fixes an issue where Apps would not receive install and uninstall events.</li><li>Fixes an issue where Apps would always enable auto updates after an update.</li><li>Fixes an issue where time would not sync correctly.</li><li>Fixes an issue where images would not be shown in a camera view.</li><li>Fixes an issue where a cloud back-up could fail temporarily.</li></ul><p><strong>Zigbee</strong></p><ul><li>Fixes an issue where devices were not made available again when they rejoined.</li><li>Fixes an issue where errors were not shown in the repair screens.</li></ul><p><strong>Z-Wave</strong></p><ul><li>Improved start-up behaviour.</li><li>Improved flashing reliability.</li></ul><p><strong>RF &amp; IR</strong></p><ul><li>Adds support for receiving 433 MHz messages via a Homey Bridge Satellite.</li><li>Fixes an issue that caused Infrared &amp; RF signal repetitions not to work as expected.</li></ul>"},{"version":"10.3.0","channel":"stable","changelog":"<p><strong>Core</strong></p><ul><li>Adds optimisations that reduce the amount of data written to persistent storage.</li></ul><p><strong>Thread</strong></p><ul><li>Enables Thread. For more information read: <a href=\"https://homey.link/homey-pro-thread-kb-article\" rel=\"noopener noreferrer\" target=\"_blank\">Using Matter over Thread on Homey Pro</a>.</li></ul><p><strong>Matter</strong></p><ul><li>Adds ability to pair a Matter device using the Homey Web App.</li><li>Adds support for thermostats.</li><li>Adds support for locks.</li></ul><p><strong>Zigbee</strong></p><ul><li>Updates Zigbee firmware to support Thread.</li></ul>"},{"version":"10.3.0-rc.12","channel":"beta","changelog":"<p><strong>Core</strong></p><ul><li>Adds optimisations that reduce the amount of data written to persistent storage.</li><li>Updates translations.</li></ul><p><strong>Zigbee</strong></p><ul><li>Fixes an issue where Zigbee would stop working when Thread started.</li></ul>"},{"version":"10.3.0-rc.7","channel":"beta","changelog":"<p><strong>Matter</strong></p><ul><li>Adds support for thermostats.</li><li>Adds support for locks.</li></ul><p><strong>Zigbee</strong></p><ul><li>Fixes an issue where Zigbee would not restart correctly.</li><li>Fixes an issue that could cause Zigbee network congestion.</li></ul>"},{"version":"10.3.0-rc.5","channel":"beta","changelog":"<p><strong>Matter</strong></p><ul><li>Adds ability to pair a Matter device using the Homey Web App.</li></ul><p><strong>Thread</strong></p><ul><li>Enables Homey Pro’s Thread radio.</li></ul><p><strong>Zigbee</strong></p><ul><li>Updates Zigbee firmware to support Thread.</li></ul>"},{"version":"10.2.1","channel":"stable","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Updates translations.</li>\r\n</ul>\r\n<p><strong>Zigbee</strong></p>\r\n<ul>\r\n<li>Fixes an issue where SmartThings Zigbee devices could not be paired.</li>\r\n</ul>\r\n<p><strong>Wi-Fi</strong></p>\r\n<ul>\r\n<li>Adds Wi-Fi connection monitoring which actively reconnects when the connection was unexpectedly lost.</li>\r\n</ul>"},{"version":"10.2.1-rc.2","channel":"beta","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Updates translations.</li>\r\n</ul>\r\n<p><strong>Zigbee</strong></p>\r\n<ul>\r\n<li>Fixes an issue where SmartThings Zigbee devices could not be paired.</li>\r\n</ul>"},{"version":"10.2.1-rc.1","channel":"beta","changelog":"<p><strong>Wi-Fi</strong></p>\r\n<ul>\r\n<li>Adds Wi-Fi connection monitoring which actively reconnects when the connection was unexpectedly lost.</li>\r\n</ul>"},{"version":"10.2.0","channel":"stable","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Fixes an issue that would prevent a device to be marked unavailable when no unavailable message was provided.</li>\r\n<li>Fixes an issue that would prevent a forwarded port to be configured and removed properly.</li>\r\n<li>Updates translations.</li>\r\n</ul>\r\n<p><strong>Matter</strong></p>\r\n<ul>\r\n<li>Updates Matter to version 1.2.</li>\r\n<li>Fixes an issue where in some cases a Matter device couldn’t be paired using an Android device.</li>\r\n<li>Fixes an issue where after a reboot Matter devices wouldn’t update.</li>\r\n</ul>\r\n<p><strong>Infrared</strong></p>\r\n<ul>\r\n<li>Adds setting to IR devices to configure the repetitions of an IR signal.</li>\r\n</ul>\r\n<p><strong>Zigbee</strong></p>\r\n<ul>\r\n<li>Prompt to install the correct Homey App when pairing a generic Zigbee device.</li>\r\n<li>Fixes an issue where a Trust Zigbee remote couldn’t be paired.</li>\r\n</ul>\r\n<p><strong>Z-Wave</strong></p>\r\n<ul>\r\n<li>Prompt to install the correct Homey App when pairing a generic Z-Wave device.</li>\r\n</ul>"},{"version":"10.2.0-rc.5","channel":"beta","changelog":"<p><strong>Core</strong></p><ul><li>Fixes an issue that would prevent a device to be marked unavailable when no unavailable message was provided.</li><li>Fixes an issue that would prevent a forwarded port to be configured and removed properly.</li><li>Updates translations.</li></ul><p><strong>Matter</strong></p><ul><li>Updates Matter to version 1.2.</li><li>Fixes an issue where in some cases a Matter device couldn’t be paired using an Android device.</li><li>Fixes an issue where after a reboot Matter devices wouldn’t update.</li></ul><p><strong>Infrared</strong></p><ul><li>Adds setting to IR devices to configure the repetitions of an IR signal.</li></ul><p><strong>Zigbee</strong></p><ul><li>Prompt to install the correct Homey App when pairing a generic Zigbee device.</li><li>Fixes an issue where a Trust Zigbee remote couldn’t be paired.</li></ul><p><strong>Z-Wave</strong></p><ul><li>Prompt to install the correct Homey App when pairing a generic Z-Wave device.</li></ul>"},{"version":"10.1.4","channel":"stable","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Fixes an issue that could cause Homey Pro to not properly restart in the unexpected case of a crash.</li>\r\n<li>Logs undervoltage ratio to Insights (available through the Power User experiment).</li>\r\n<li>Updates translations.</li>\r\n</ul>\r\n<p><strong>Wi-Fi</strong></p>\r\n<ul>\r\n<li>Fixes an issue with connecting to DFS channels introduced in v10.1.0.</li>\r\n</ul>\r\n<p><strong>Zigbee</strong></p>\r\n<ul>\r\n<li>Adds a workaround for certain Aqara devices that will only report to Aqara Zigbee controllers.</li>\r\n<li>Adding a Zigbee device now defaults to the selected driver when the joining device did not identify itself.</li>\r\n<li>Adds ZCL group id and source endpoint information to the metadata of a ZCL frame, similar to Homey Pro (2016—2019) and Homey Bridge.</li>\r\n</ul>\r\n<p><strong>Notifications</strong></p>\r\n<ul>\r\n<li>Removes undefined notification groups that were created after a migration from Homey Pro (2016—2019).</li>\r\n</ul>\r\n<p><strong>Alarms</strong></p>\r\n<ul>\r\n<li>Fixes an issue that could cause repeating alarm related Flow cards to not trigger when the alarm was disabled while it ran the last time.</li>\r\n</ul>\r\n<p><strong>Zone Activity</strong></p>\r\n<ul>\r\n<li>Excludes devices from Zone Activity while they are unavailable.</li>\r\n</ul>"},{"version":"10.1.4-rc.3","channel":"beta","changelog":"<p><strong>Wi-Fi</strong></p>\r\n<ul>\r\n<li>Fixes an issue with connecting to DFS channels introduced in v10.1.0.</li>\r\n</ul>\r\n<p><strong>Notifications</strong></p>\r\n<ul>\r\n<li>Removes undefined notification groups that were created after a migration from Homey Pro (2016—2019).</li>\r\n</ul>"},{"version":"10.1.4-rc.2","channel":"beta","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Fixes an issue that could cause Homey Pro to not properly restart in the unexpected case of a crash.</li>\r\n<li>Logs undervoltage ratio to Insights (available through the Power User experiment).</li>\r\n<li>Updates translations.</li>\r\n</ul>\r\n<p><strong>Zigbee</strong></p>\r\n<ul>\r\n<li>Adds a workaround for certain Aqara devices that will only report to Aqara Zigbee controllers.</li>\r\n<li>Adding a Zigbee device now defaults to the selected driver when the joining device did not identify itself.</li>\r\n<li>Adds ZCL group id and source endpoint information to the metadata of a ZCL frame, similar to Homey Pro (2016—2019) and Homey Bridge.</li>\r\n</ul>\r\n<p><strong>Notifications</strong></p>\r\n<ul>\r\n<li>Removes undefined notification groups that were created after a migration from Homey Pro (2016—2019).</li>\r\n</ul>\r\n<p><strong>Alarms</strong></p>\r\n<ul>\r\n<li>Fixes an issue that could cause repeating alarm related Flow cards to not trigger when the alarm was disabled while it ran the last time.</li>\r\n</ul>\r\n<p><strong>Zone Activity</strong></p>\r\n<ul>\r\n<li>Excludes devices from Zone Activity while they are unavailable.</li>\r\n</ul>"},{"version":"10.1.2-rc.1","channel":"beta","changelog":"<p><strong>Z-Wave</strong></p><ul><li>Adds improved diagnostic abilities.</li></ul>"},{"version":"10.1.0","channel":"stable","changelog":"<p><strong>Core</strong></p><ul><li>Fixes an issue where a zone could be its own parent.</li><li>Fixes an issue where apps could not always retrieve image streams.</li><li>Fixes an issue where the \"The temperature becomes greater/less than °C\" Flow card would not use Fahrenheit in countries using the imperial system.</li><li>Adds a Flow card for sending raw pronto hex IR commands (available through the Power User experiment).</li><li>Fixes an issue where App insights were deleted on reboot.</li><li>Fixes an undefined timezone for some users.</li><li>Fixes an issue where the time range in Insights would not use Homey Pro’s timezone.</li><li>Fixes an issue where the \"Start a Flow\" Flow card could not start Flows starting with a \"when\" Flow card containing an argument.</li><li>Logs memory usage of Homey Pro to Insights (available through the Power User experiment).</li></ul><p><strong>Bluetooth Low Energy</strong></p><ul><li>Improves BLE memory usage and performance.</li></ul><p><strong>433 MHz &amp; IR</strong></p><ul><li>Increase max message length to support longer IR and 433 MHz commands.</li></ul><p><strong>Z-Wave</strong></p><ul><li>Updates Z-Wave firmware to reduce TRANSMIT_COMPLETE_FAIL errors.</li><li>Improves message retry mechanism.</li><li>Adds support for Command Class Meter V6.</li><li>Adds power measurement capabilities to unknown Z-Wave devices (if supported by the device).</li></ul><p><strong>Zigbee</strong></p><ul><li>Adds power measurement capabilities to unknown Zigbee devices (if supported by the device).</li></ul><p><strong>Satellite Mode</strong></p><ul><li>Adds functionality that enables Homey Bridge to act as a Zigbee router.</li></ul><p><strong>Matter</strong></p><ul><li>Fixes an issue where Matter Bridges with many bridged devices could not be paired.</li><li>Adds support for Matter window coverings.</li><li>Adds support for Matter buttons.</li></ul><p><strong>Wi-Fi</strong></p><ul><li>Updates Wi-Fi driver to latest version.</li></ul><p><strong>Presence</strong></p><ul><li>Fixes an issue that could cause presence Flow cards to be triggered twice when the presence state of multiple users changes simultaneously.</li></ul><p><strong>Setup</strong></p><ul><li>Fixes an issue where enabling setup twice in a row would fail.</li></ul>"},{"version":"10.1.0-rc.4","channel":"beta","changelog":"<p><strong>Core</strong></p><ul><li>Fixes an issue where a zone could be its own parent.</li><li>Fixes an issue where apps could not always retrieve image streams.</li><li>Fixes an issue where the \"The temperature becomes greater/less than °C\" Flow card would not use Fahrenheit in countries using the imperial system.</li><li>Adds a Flow card for sending raw pronto hex IR commands (available through the Power User experiment).</li><li>Fixes an issue where App insights were deleted on reboot.</li><li>Fixes an undefined timezone for some users.</li><li>Fixes an issue where the time range in Insights would not use Homey Pro’s timezone.</li><li>Fixes an issue where the \"Start a Flow\" Flow card could not start Flows starting with a \"when\" Flow card containing an argument.</li><li>Logs Homey Pro's memory usage to Insights.</li></ul><p><strong>Bluetooth Low Energy</strong></p><ul><li>Improves BLE memory usage and performance.</li></ul><p><strong>433 MHz &amp; IR</strong></p><ul><li>Increase max message length to support longer IR and 433 MHz commands.</li></ul><p><strong>Z-Wave</strong></p><ul><li>Updates Z-Wave firmware to reduce TRANSMIT_COMPLETE_FAIL errors.</li><li>Improves message retry mechanism.</li><li>Adds support for Command Class Meter V6.</li></ul><p><strong>Matter</strong></p><ul><li>Adds support for Matter window coverings.</li><li>Adds support for Matter buttons.</li></ul><p><strong>Setup</strong></p><ul><li>Fixes an issue where enabling setup twice in a row would fail.</li></ul>"},{"version":"10.1.0-rc.2","channel":"beta","changelog":"<p><strong>Z-Wave</strong></p><ul><li>Adds power measurement capabilities to unknown Z-Wave devices (if supported by the device).</li></ul><p><strong>Zigbee</strong></p><ul><li>Adds power measurement capabilities to unknown Zigbee devices (if supported by the device).</li></ul><p><strong>Satellite Mode</strong></p><ul><li>Adds functionality that enables Homey Bridge to act as a Zigbee router.</li></ul><p><strong>Wi-Fi</strong></p><ul><li>Updates Wi-Fi driver to latest version.</li></ul><p><strong>Presence</strong></p><ul><li>Fixes an issue that could cause presence Flow cards to be triggered twice when the presence state of multiple users changes simultaneously.</li></ul><p><strong>Matter</strong></p><ul><li>Fixes an issue where Matter Bridges with many bridged devices could not be paired.</li></ul>"},{"version":"10.0.9-rc.1","channel":"beta","changelog":"<p><strong>Wi-Fi</strong></p><ul><li>Updates Wi-Fi driver to latest version.</li></ul>"},{"version":"10.0.8","channel":"stable","changelog":"<p><strong>OTA</strong></p><ul><li>Fixes an issue that could cause an OTA update to fail.</li></ul><p><strong>Wi-Fi</strong></p><ul><li>Fixes an issue that could cause the Wi-Fi chip to be configured for a different region.</li></ul><p><strong>Note</strong>: for the users experiencing Z-Wave TRANSMIT_COMPLETE_FAIL errors, unfortunately this release will not completely solve that issue. It contains workarounds that can reduce the number of errors for some. Silicon Labs has identified the issue and we are working with them to resolve this as soon as possible. Please know, this issue is our highest priority right now. We thank you for your patience.</p>"},{"version":"10.0.7-rc.1","channel":"beta","changelog":"<p><strong>Wi-Fi</strong></p>\r\n<ul>\r\n<li>Updates Wi-Fi drivers to latest version.</li>\r\n</ul>"},{"version":"10.0.6","channel":"stable","changelog":"<p><strong>Z-Wave</strong></p><ul><li>Restarts Z-Wave chip when it gets stuck on TRANSMIT_COMPLETE_FAIL errors.</li><li>Fixes an issue that could result in more retries than required.</li></ul><p><strong>Core</strong></p><ul><li>Updates translations.</li></ul><p><strong>Note</strong>: for the users experiencing Z-Wave TRANSMIT_COMPLETE_FAIL errors, unfortunately this release will not completely solve that issue. It contains workarounds that can reduce the number of errors for some. Silicon Labs has identified the issue and we are working with them to resolve this as soon as possible. Please know, this issue is our highest priority right now. We thank you for your patience.</p>"},{"version":"10.0.6-rc.3","channel":"beta","changelog":"<p><strong>Z-Wave</strong></p><ul><li>Restarts Z-Wave chip when it gets stuck on TRANSMIT_COMPLETE_FAIL errors.</li><li>Fixes an issue that could result in more retries than required.</li></ul><p><strong>Core</strong></p><ul><li>Updates translations.</li></ul><p><strong>Wi-Fi</strong></p><ul><li>Updates Wi-Fi driver to the latest version.</li></ul><p><strong>Note</strong>: for the users experiencing Z-Wave TRANSMIT_COMPLETE_FAIL errors, unfortunately this release will not completely solve that issue. It contains workarounds that can reduce the number of errors for some. Silicon Labs has identified the issue and we are working with them to resolve this as soon as possible. Please know, that this issue is our highest priority right now. We thank you for your patience.</p>"},{"version":"10.0.5","channel":"stable","changelog":"<p><strong>Z-Wave</strong></p><ul><li>Fixes an issue with handling empty messages.</li><li>Fixes an issue that could cause unnecessary load on the Z-Wave chip.</li><li>Fixes an issue that resulted in responding with an unencrypted Supervision Report to an encrypted Supervision Get.</li><li>Adds retrying when sending commands.</li><li>Adds more detailed Z-Wave diagnostics with regard to TRANSMIT_COMPLETE_FAIL errors.</li></ul><p><strong>Zigbee</strong></p><ul><li>Changes Zigbee knowledge base article shown when adding a device to a Homey Pro (Early 2023) specific article.</li><li>Improves error message shown when a Homey app could not be found for the device that was added.</li></ul><p><strong>Note</strong>: for the users experiencing Z-Wave TRANSMIT_COMPLETE_FAIL errors, unfortunately this release will not completely solve that issue. Although it can reduce the number of errors for some. Please know, that this issue is our highest priority right now, and we are working hard, in collaboration with Silicon Labs, to resolve this as soon as possible. We thank you for your patience.</p>"},{"version":"10.0.5-rc.6","channel":"beta","changelog":"<p><strong>Z-Wave</strong></p>\r\n<ul>\r\n<li>Fixes an issue with handling empty messages.</li>\r\n<li>Fixes an issue that could cause unnecessary load on the Z-Wave chip.</li>\r\n</ul>"},{"version":"10.0.5-rc.5","channel":"beta","changelog":"<p><strong>Z-Wave</strong></p>\r\n<ul>\r\n<li>Improve high-level delayed retrying when sending commands.</li>\r\n<li>Adds more detailed Z-Wave diagnostics.</li>\r\n</ul>"},{"version":"10.0.5-rc.4","channel":"beta","changelog":"<p><strong>Z-Wave</strong></p><ul><li>Adds high-level delayed retrying when sending commands.</li><li>Adds more detailed Z-Wave diagnostics.</li><li>Fixes an issue that resulted in responding with an unencrypted Supervision Report to an encrypted Supervision Get.</li></ul><p><strong>Zigbee</strong></p><ul><li>Changes Zigbee knowledge base article shown when adding a device to a Homey Pro (Early 2023) specific article.</li><li>Improves error message shown when a Homey app could not be found for the device that was added.</li></ul>"},{"version":"10.0.4","channel":"stable","changelog":"<p><strong>Core</strong></p><ul><li>Updated translations.</li></ul><p><strong>Wi-Fi</strong></p><ul><li>Fixed an issue that caused Wi-Fi to be enabled again after reboot while it should remain disabled.</li></ul><p><strong>Matter</strong></p><ul><li>Fixed an issue that could cause Homey Pro (Early 2023) to reboot when Matter failed to start.</li></ul><p><strong>Apps</strong></p><ul><li>Added missing permission scope (https://github.com/athombv/homey-web-api-issues/issues/45).</li></ul><p><strong>Z-Wave</strong></p><ul><li>Reduce logging while creating and restoring a backup.</li></ul><p><strong>Zigbee</strong></p><ul><li>Fixes an issue that could prevent Zigbee to start after restoring a backup.</li><li>Fixed an issue that could prevent Zigbee from starting due to a timeout.</li><li>Fixed an issue that could prevent Zigbee from starting due to a device with a missing network address.</li><li>Fixed an issue that could result in difficulties repairing devices after a migration from Homey Pro (2016—2019).</li><li>Fixed an issue that could result in Zigbee devices not being configured properly after a repair.</li><li>Fixed an issue that could result in empty device settings after a repair.</li><li>Fixed an issue that could mark a device as successfully repaired even though it was not.</li><li>Fixed an issue that could result in \"Zigbee is busy\" errors.</li><li>Fixed an issue that could result in a timeout when resetting the network from the Developer Tools.</li><li>Improved error message while Zigbee is starting.</li><li>Improved error message for basic Zigbee devices when they are not responsive.</li><li>Show correct error message when adding a device timed out.</li><li>Fixed an issue that could cause a timeout overflow warning to occur.</li></ul>"},{"version":"10.0.4-rc.10","channel":"beta","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Fixed an issue that caused increased CPU load.</li>\r\n</ul>"},{"version":"10.0.4-rc.9","channel":"beta","changelog":"<p><strong>Core</strong></p><ul><li>Updated translations.</li></ul><p><strong>Wi-Fi</strong></p><ul><li>Fixed an issue that caused Wi-Fi to be enabled again after reboot while it should remain disabled.</li></ul><p><strong>Matter</strong></p><ul><li>Fixed an issue that could cause Homey Pro (Early 2023) to reboot when Matter failed to start.</li></ul><p><strong>Apps</strong></p><ul><li>Added missing permission scope (https://github.com/athombv/homey-web-api-issues/issues/45).</li></ul><p><strong>Z-Wave</strong></p><ul><li>Reduce logging while creating and restoring a backup.</li></ul><p><strong>Zigbee</strong></p><ul><li>Fixes an issue that could prevent Zigbee to start after restoring a backup.</li><li>Fixed an issue that could prevent Zigbee from starting due to a timeout.</li><li>Fixed an issue that could prevent Zigbee from starting due to a device with a missing network address.</li><li>Fixed an issue that could result in difficulties repairing devices after a migration from Homey Pro (2016—2019).</li><li>Fixed an issue that could result in Zigbee devices not being configured properly after a repair.</li><li>Fixed an issue that could result in empty device settings after a repair.</li><li>Fixed an issue that could mark a device as successfully repaired even though it was not.</li><li>Fixed an issue that could result in \"Zigbee is busy\" errors.</li><li>Fixed an issue that could result in a timeout when resetting the network from the Developer Tools.</li><li>Improved error message while Zigbee is starting.</li><li>Improved error message for basic Zigbee devices when they are not responsive.</li><li>Show correct error message when adding a device timed out.</li><li>Fixed an issue that could cause a timeout overflow warning to occur.</li></ul>"},{"version":"10.0.3","channel":"stable","changelog":"<p><strong>Core</strong></p><ul><li>Performance and stability improvements.</li><li>Update translations.</li></ul><p><strong>Wi-Fi</strong></p><ul><li>Add more verbose logging.</li><li>Improve Wi-Fi connectivity stability.</li></ul><p><strong>Z-Wave</strong></p><ul><li>Made improvements that can reduce TRANSMIT_COMPLETE_FAIL errors.</li><li>Fixed an issue that could cause TRANSMIT_COMPLETE_NOROUTE errors when adding a Z-Wave device.</li><li>Improved error messages in case Z-Wave is flashing the chip, creating a back-up, or restoring a back-up.</li><li>Reduced time needed to start Z-Wave after an out-of-the-box setup.</li></ul><p><strong>Zigbee</strong></p><ul><li>Improve error message shown to the user while flashing the Zigbee chip with new firmware.</li></ul><p><strong>Satellite Mode</strong></p><ul><li>Fixed an issue that caused a Homey Bridge to remain a Z-Wave node in Homey Pro after removal.</li></ul>"},{"version":"10.0.3-rc.4","channel":"beta","changelog":"<p><strong>Core</strong></p><ul><li>Performance and stability improvements.</li><li>Update translations.</li></ul><p><strong>Wi-Fi</strong></p><ul><li>Add more verbose logging.</li><li>Improve Wi-Fi connectivity stability.</li></ul><p><strong>Z-Wave</strong></p><ul><li>Made improvements that can reduce TRANSMIT_COMPLETE_FAIL errors.</li><li>Fixed an issue that could cause TRANSMIT_COMPLETE_NOROUTE errors when adding a Z-Wave device.</li><li>Improved error messages in case Z-Wave is flashing the chip, creating a back-up, or restoring a back-up.</li><li>Reduced time needed to start Z-Wave after an out-of-the-box setup.</li></ul><p><strong>Zigbee</strong></p><ul><li>Improve error message shown to the user while flashing the Zigbee chip with new firmware.</li></ul><p><strong>Satellite Mode</strong></p><ul><li>Fixed an issue that caused a Homey Bridge to remain a Z-Wave node in Homey Pro after removal.</li></ul>"},{"version":"10.0.2","channel":"stable","changelog":"<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Updated translations.</li>\r\n</ul>\r\n<p><strong>Zigbee</strong></p>\r\n<ul>\r\n<li>Improved stability.</li>\r\n</ul>\r\n<p><strong>Z-Wave</strong></p>\r\n<ul>\r\n<li>Fixes a bug where detection of chatty devices had no baseline.</li>\r\n</ul>\r\n<p><strong>Flow</strong></p>\r\n<ul>\r\n<li>Fixes a bug where empty autocomplete lists would throw an error.</li>\r\n</ul>"},{"version":"10.0.2-rc.1","channel":"beta","changelog":"<p><strong>Core</strong></p><ul><li>Updated translations.</li></ul><p><strong>Zigbee</strong></p><ul><li>Improved stability.</li></ul><p><strong>Z-Wave</strong></p><ul><li>Fixes a bug where detection of chatty devices had no baseline.</li></ul><p><strong>Flow</strong></p><ul><li>Fixes a bug where empty autocomplete lists would throw an error.</li></ul>"},{"version":"10.0.1","channel":"stable","changelog":"<p><strong>Matter</strong></p>\r\n<ul>\r\n<li>Fixes a layout issue in the add a Matter device views.</li>\r\n<li>Fixes an issue that could cause a Matter device to be incorrectly removed after a failed pair attempt.</li>\r\n</ul>\r\n<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Increase max number of timeline notifications to 250.</li>\r\n<li>Updated translations.</li>\r\n</ul>\r\n<p><strong>Backups</strong></p>\r\n<ul>\r\n<li>Fixes an issue that could cause restoring a backup to fail.</li>\r\n</ul>\r\n<p><strong>Flow</strong></p>\r\n<ul>\r\n<li>Fixes an issue with “Make a request” Logic Flow cards where the headers would not be parsed correctly.</li>\r\n<li>Fixes an issue with the Date &amp; Time \"is between\" Flow card that did not consider seconds in the \"is between\" comparison.</li>\r\n</ul>\r\n<p><strong>Presence</strong></p>\r\n<ul>\r\n<li>Fixes an issue that prevented the \"first person left\" and \"first person woke up\" Flow cards from working when there was a disabled user present.</li>\r\n</ul>\r\n<p><strong>Zigbee</strong></p>\r\n<ul>\r\n<li>Reduce number of route repair attempts.</li>\r\n</ul>"},{"version":"10.0.1-rc.1","channel":"beta","changelog":"<p><strong>Matter</strong></p>\r\n<ul>\r\n<li>Fixes a layout issue in the add a Matter device views.</li>\r\n<li>Fixes an issue that could cause a Matter device to be incorrectly removed after a failed pair attempt.</li>\r\n</ul>\r\n<p><strong>Core</strong></p>\r\n<ul>\r\n<li>Increase max number of timeline notifications to 250.</li>\r\n<li>Updated translations.</li>\r\n</ul>\r\n<p><strong>Backups</strong></p>\r\n<ul>\r\n<li>Fixes an issue that could cause restoring a backup to fail.</li>\r\n</ul>\r\n<p><strong>Flow</strong></p>\r\n<ul>\r\n<li>Fixes an issue with “Make a request” Logic Flow cards where the headers would not be parsed correctly.</li>\r\n<li>Fixes an issue with the Date &amp; Time \"is between\" Flow card that did not consider seconds in the \"is between\" comparison.</li>\r\n</ul>\r\n<p><strong>Presence</strong></p>\r\n<ul>\r\n<li>Fixes an issue that prevented the \"first person left\" and \"first person woke up\" Flow cards from working when there was a disabled user present.</li>\r\n</ul>\r\n<p><strong>Zigbee</strong></p>\r\n<ul>\r\n<li>Reduce number of route repair attempts.</li>\r\n</ul>"},{"version":"10.0.0","channel":"stable","changelog":"<p>This release marks the end of the Homey Pro (Early 2023) Early Access period. </p>\r\n<p>Although this is the first stable firmware release, our work is never done. We continue our effort to solve issues and complete new features such as:</p>\r\n<ul>\r\n<li>Support for additional Matter device types (e.g. thermostats, window coverings, and more).</li>\r\n<li>Matter over Thread (Matter over Wi-Fi is already supported).</li>\r\n<li>Satellite Mode for Zigbee (Z-Wave, 433 MHz, and IR are already supported).</li>\r\n<li>Port Forwarding.</li>\r\n</ul>\r\n<p>Special thanks to everyone who has been with us during the Early Access period and provided a lot of valuable feedback. It has made, and still makes, a huge difference and got us to where we are now.</p>\r\n<p>If you have feedback or experience any issues, please let us know through our regular support channels.</p>"},{"version":"10.0.0-rc.142","channel":"beta","changelog":"<p><strong>Matter</strong></p><ul><li>Fixes a layout issue in the add a Matter device views.</li><li>Fixes an issue that could cause a Matter device to be incorrectly removed after a failed pair attempt.</li></ul><p><strong>Core</strong></p><ul><li>Increase max number of timeline notifications to 250.</li></ul>"},{"version":"10.0.0-rc.139","channel":"stable","changelog":"<p><strong>Apps</strong></p><ul><li>Fixes an issue where crashing apps would restart too fast.</li><li>Improve logging related to app crashes.</li><li>Fixes an issue with empty Insights Logs.</li></ul><p><strong>Flow</strong></p><ul><li>Fixes an issue that allows apps to await executed Flows.</li><li>Fixes an issue that resulted in missing names in Shared Flows.</li></ul><p><strong>Advanced Flow</strong></p><ul><li>Fixes an issue with images not being available when testing Advanced Flows.</li></ul><p><strong>Core</strong></p><ul><li>Improved Wi-Fi connectivity stability.</li><li>Update translations.</li><li>Increase max allowed users.</li><li>Improve error logging.</li></ul><p><strong>Matter</strong></p><ul><li>Add support for Matter Bridges.</li></ul><p><strong>Zigbee</strong></p><ul><li>Improve logging.</li><li>Fixes an issue that could cause \"Zigbee is busy\" errors after restoring a backup, or after starting Homey Pro in Setup Mode.</li></ul><p><strong>433 MHz</strong></p><ul><li>Fixes an issue that could cause \"Sent Too Many 433 MHz Commands\" errors.</li></ul><p><strong>IR</strong></p><ul><li>Fixes an issue that could cause \"Sent Too Many IR Commands\" errors.</li></ul><p><strong>Z-Wave</strong></p><ul><li>Improve error message for \"TRANSMIT_NOROUTE\" errors.</li><li>Fixes an issue that could cause \"TRANSMIT_NOROUTE\" errors while adding a device.</li></ul>"},{"version":"10.0.0-rc.137","channel":"beta","changelog":"<p><strong>Matter</strong></p><ul><li>Add support for Matter Bridges.</li></ul><p><strong>Apps</strong></p><ul><li>Fixes an issue where crashing apps would restart too fast.</li><li>Improve logging related to app crashes.</li><li>Fixes an issue with empty Insights Logs.</li></ul><p><strong>Advanced Flow</strong></p><ul><li>Fixes an issue with images not being available when testing Advanced Flows.</li></ul><p><strong>Flow</strong></p><ul><li>Fixes an issue that resulted in missing names in Shared Flows.</li></ul><p><strong>Zigbee</strong></p><ul><li>Improve logging.</li></ul><p><strong>Core</strong></p><ul><li>Improved Wi-Fi connectivity stability.</li><li>Update translations.</li><li>Increase max allowed users.</li><li>Improve error logging.</li></ul>"},{"version":"10.0.0-rc.133","channel":"stable","changelog":"<p><strong>Zigbee</strong></p><ul><li>Fixes an issue that could cause Zigbee devices to stop reporting (e.g. after a reboot). Note: if there is no network address listed at https://tools.developer.homey.app/tools/zigbee for that device a repair might be required.</li><li>Fixes an issue that could cause Homey to reboot after activating setup mode.</li><li>Fixes an issue that could cause \"Zigbee is busy\" error messages.</li><li>Fixes an issue that caused problems with nodes that send ZCL commands to Homey (e.g. the smpl mini display).</li><li>Fixes an issue that resulted in invalid Zigbee system information in the Developer Tools.</li><li>Various other stability improvements.</li><li>Add duration option to \"Basic Zigbee Device\" dim Flow cards (requires deleting and re-adding existing device).</li></ul><p><strong>Matter</strong></p><ul><li>Updated Matter pairing screens.</li><li>Removed Matter experiment (Matter is now always enabled).</li></ul>"},{"version":"10.0.0-rc.122","channel":"stable","changelog":"<p><strong>BLE</strong></p><ul><li>Fixed an issue that could cause various BLE communication issues.</li></ul><p><strong>OTA</strong></p><ul><li>Improve stability of downloading OTA updates.</li></ul><p><strong>Z-Wave</strong></p><ul><li>Update firmware of Z-Wave to latest version</li><li>Clarified Z-Wave error messages to explain the actual problem to the user</li><li>Notify user if a device is very \"chatty\" on the Z-Wave network</li><li>Fixes an issue where multiple Z-Wave backups were made.</li></ul><p><strong>Flows</strong></p><ul><li>Fixes an issue where autocomplete items did not show their names.</li><li>Fixes an issue where flows with the sunrise card could not be saved.</li></ul><p><strong>System</strong></p><ul><li>Fixes an issue where backups and updates were not run at the correct times.</li></ul>"},{"version":"10.0.0-rc.121","channel":"beta","changelog":"<p><strong>Z-Wave</strong></p><ul><li>Fixes an issue where multiple Z-Wave backups were made.</li><li>Update firmware of Z-Wave to the latest version.</li><li>Clarified Z-Wave error messages to explain the actual problem to the user.</li><li>Notify user if a device is very \"chatty\" on the Z-Wave network.</li></ul><p><strong>Flows</strong></p><ul><li>Fixes an issue where autocomplete items did not show their names.</li><li>Fixes an issue where flows with the sunrise card could not be saved.</li></ul><p><strong>System</strong></p><ul><li>Fixes an issue where backups and updates were not run at the correct times.</li><li>Fixed an issue where Homey Pro's ethernet address would not be reported correctly in some cases.</li></ul>"},{"version":"10.0.0-rc.118","channel":"stable","changelog":"<p><strong>System</strong></p><ul><li>Fixes an issue where apps with added permissions would not auto-update.</li><li>Fixes an issue where backups were not scheduled.</li><li>Fixes an issue where the title of the disable/enable guest flow card was unclear.</li><li>Fixes an issue where push messages could be sent to disabled users.</li><li>Fixes where some flow cards where inadvertently causing rate limits.</li><li>Fixes an issue that causes USB realtek network driver loading to fail.</li><li>Fixes an issue that causes Broadcom 43455 driver loading to fail.</li><li>Fixes an issue where originator of Flows was not set correctly.</li><li>Fixes an issue where ZWave and Zigbee firmware could not be updated simultaneously.</li><li>Fixes an issue where the flow card for running a flow every X minutes/days etc would run incorrectly.</li><li>Fixes an issue where an app could crash when it supplied an Image stream.</li><li>Fixes an issue where Homey could lockup because of a kernel crash.</li><li>Fixes an issue where Any Alarm goes of in x minutes would not run reliably.</li></ul><p><strong>Z-Wave</strong></p><ul><li>Fixes an issue that could result in a crash when Z-Wave Satellite mode could not start correctly.</li><li>Added support for satellite mode.</li></ul><p><strong>Matter</strong></p><ul><li>Added beta support for Matter. For more information read:&nbsp;<a href=\"https://support.homey.app/hc/en-us/articles/9075551662108-Matter-Beta-for-Homey-Pro-Early-2023\" rel=\"noopener noreferrer\" target=\"_blank\">Matter (Beta) for Homey Pro (Early 2023)</a>.</li><li>Fixes some issues that could cause pairing a Matter device to fail.</li></ul><p><strong>Apps</strong></p><ul><li>Fixes an issue where it was not possible for apps to override zone activity for a capability.</li><li>Fixes an issue where some Flow cards were not generated for apps when the card device argument filter had multiple capabilities.</li><li>Fixes an issue that caused mDNS hostnames to not resolve to their respective IP addresses.</li><li>Fixes an issue that could result in a \"Capability Not Getable\" error.</li></ul><p><strong>Backups</strong></p><ul><li>Fixes an issue that could cause multiple backups to be created in one night.</li></ul><p><strong>Setup</strong></p><ul><li>Fixes an issue that could result in a failure when fetching a long list of Wi-Fi SSIDs.</li></ul><p><strong>BLE</strong></p><ul><li>Fixes an issue where discovery could not be performed.</li></ul><p><strong>Notifications</strong></p><ul><li>Fixes an issue where images would not be loaded in push notifications.</li></ul><p><strong>Discovery</strong></p><ul><li>Fixes an issue where DNS lookup of mDns discovery results failed.</li></ul>"},{"version":"10.0.0-rc.115","channel":"beta","changelog":"<p><strong>System</strong></p><ul><li>Fixes an issue where originator of Flows was not set correctly.</li></ul><p><strong>Z-Wave</strong></p><ul><li>Fixes an issue that could result in a crash when Z-Wave Satellite mode could not start correctly.</li></ul><p><strong>Apps</strong></p><ul><li>Fixes an issue that caused mDNS hostnames to not resolve to their respective IP addresses.</li></ul><p><strong>Backups</strong></p><ul><li>Fixes an issue that could cause multiple backups to be created in one night.</li></ul><p><strong>Setup</strong></p><ul><li>Fixes an issue that could result in a failure when fetching a long list of Wi-Fi SSIDs.</li></ul><p><strong>BLE</strong></p><ul><li>Fixes an issue where discovery could not be performed.</li></ul><p><strong>Notifications</strong></p><ul><li>Fixes an issue where images would not be loaded in push notifications.</li></ul>"},{"version":"10.0.0-rc.114","channel":"beta","changelog":"<p><strong>Z-Wave</strong></p><ul><li>Added support for satellite mode.</li></ul><p><strong>System</strong></p><ul><li>Fixes an issue where ZWave and Zigbee firmware could not be updated simultaneously.</li><li>Fixes an issue where the flow card for running a flow every X minutes/days etc would run incorrectly.</li><li>Fixes an issue where an app could crash when it supplied an Image stream.</li><li>Fixes an issue where Homey could lockup because of a kernel crash.</li><li>Fixes an issue where Any Alarm goes of in x minutes would not run reliably.</li></ul><p><strong>Discovery</strong></p><ul><li>Fixes an issue where DNS lookup of mDns discovery results failed.</li></ul><p><strong>Apps</strong></p><ul><li>Fixes an issue that could result in a \"Capability Not Getable\" error.</li></ul><p><strong>Matter</strong></p><ul><li>Added beta support for Matter. For more information read:&nbsp;<a href=\"https://support.homey.app/hc/en-us/articles/9075551662108-Matter-Beta-for-Homey-Pro-Early-2023\" rel=\"noopener noreferrer\" target=\"_blank\">Matter (Beta) for Homey Pro (Early 2023)</a>.</li></ul>"},{"version":"10.0.0-rc.110","channel":"stable","changelog":"<p><strong>System</strong></p><ul><li>Fixes an issue where the LED ring went red inadvertently.</li><li>Fixes an issue where update events were not sent on flow create and delete.</li></ul><p><strong>Discovery</strong></p><ul><li>Fixes an issue where mDNS was not backwards compatible with Homey Pro 2019.</li></ul><p><strong>RF</strong></p><ul><li>Improves the 433 reliability by using Listen Before Talk.</li></ul><p><strong>Bluetooth</strong></p><ul><li>Fixes an issue where manufacturerData was incorrect.</li><li>Fixes an issue where discovery filtering on 16 bit UUIDs did not work.</li><li>Fixes an issue where RSSI and other properties were not up to date.</li><li>Fixes an issue where devices where not discovered.</li></ul>"},{"version":"10.0.0-rc.108","channel":"beta","changelog":"<p><strong>System</strong></p><ul><li>Fixes an issue where in certain languages the odd/even week number flow card was incorrect.</li><li>Fixes an issue where OTA updates could not be downloaded.</li></ul>"},{"version":"10.0.0-rc.107","channel":"beta","changelog":"<p><strong>433 Mhz</strong></p><ul><li>Fixes an issue where transmitted signals were colliding with received signals.</li><li>Fixes an issue where both Homey and satellite could send simultaneously (cancelling each other).</li></ul><p><strong>System</strong></p><ul><li>Fixes an issue where satellites did not reconnect correctly.</li></ul>"},{"version":"10.0.0-rc.105","channel":"stable","changelog":"<p><strong>Zigbee</strong></p><ul><li>Fixed an issue that could lead to \"Zigbee is busy\" errors.</li></ul>"},{"version":"10.0.0-rc.103","channel":"beta","changelog":"<p><strong>Bluetooth LE</strong></p><ul><li>Fixed an issue where BLE devices could not be found.</li></ul><p><strong>Zigbee</strong></p><ul><li>Fixed a migration issue from Homey Pro Early 2019 that could cause the \"expected_new_range_start_number\" error when controlling basic Zigbee devices (requires device repair).</li></ul><p><strong>Weather</strong></p><ul><li>Fixed an issue where Celcius would show when Homey Pro is in a country where Fahrenheit is used.</li></ul><p><strong>Migration</strong></p><ul><li>Fixed an issue where Number-type Variables would create duplicate logs.</li><li>Fixed an issue where Weather-logs would miss their title.</li><li>Fixed an issue where the Flow cards 'The day number is between' and 'The week number is between' would not be migrated correctly.</li></ul>"},{"version":"10.0.0-rc.100","channel":"stable","changelog":"<p><strong>Z-Wave</strong></p><ul><li>Fixed an issue where incoming Z-Wave messages would not be handled after creating a (nightly) backup.</li></ul><p><strong>Zigbee</strong></p><ul><li>Fixed an issue where multiple 'Zigbee device has left the network.' notifications would be created.</li></ul>"},{"version":"10.0.0-rc.99","channel":"beta","changelog":"<p><strong>Apps</strong></p><ul><li>Fixed an issue where images would not load when running an app inside Docker during development.</li></ul>"},{"version":"10.0.0-rc.98","channel":"stable","changelog":"<p><strong>Apps</strong></p><ul><li>Fixed an issue where developers would receive a crash report when an app has been killed.</li></ul>"},{"version":"10.0.0-rc.97","channel":"beta","changelog":"<p><strong>Apps</strong></p><ul><li>Fixed an issue where some mDNS discovery results would not reach the app's listeners.</li><li>Changed the memwarm limit from 100MB to 120MB.</li><li>Changed the cpuwarm limit from 5% to 10%.</li></ul>"},{"version":"10.0.0-rc.95","channel":"beta","changelog":"<p><strong>Backups</strong></p><ul><li>Fixed an issue where Z-Wave backups would not be created and/or restored.</li><li>Fixed an issue where user settings might not be backed up in some cases.</li></ul><p><strong>Apps</strong></p><ul><li>Apps will now be forcefully stopped after receiving 5 memory or cpu warnings.</li></ul><p><strong>Flow</strong></p><ul><li>Flow cards 'All devices are turned on/off' and 'All alarms are turned on/off' now return an error when no devices have been found to check against.</li></ul>"},{"version":"10.0.0-rc.94","channel":"beta","changelog":"<p><strong>System</strong></p><ul><li>Fixed an issue where device's capabilities values would not always be saved across reboots.</li></ul><p><strong>Apps SDK</strong></p><ul><li>Fixed an issue where the DEBUG-environment variable was not set to '1' when running the app using 'homey app run --remote'.</li></ul><p><strong>HomeyScript</strong></p><ul><li>Fixed an issue where HomeyScript could not execute Flow cards.</li></ul>"},{"version":"10.0.0-rc.93","channel":"beta","changelog":"<p><strong>System</strong></p><ul><li>Fixed an issue where installing updates could abort halfway.</li></ul>"},{"version":"10.0.0-rc.90","channel":"stable","changelog":"<p><strong>System</strong></p><ul><li>Fixed an issue where Homey Pro would not restart, both manually or after installing an update.</li></ul><p><em>Note: If you cannot update Homey Pro due to this issue, please use the USB Tool at&nbsp;</em><a href=\"https://ota-usb.homeypro.net/\" rel=\"noopener noreferrer\" target=\"_blank\" style=\"color: var(--color-accent-fg);\"><em>https://ota-usb.homeypro.net</em></a><em>&nbsp;to update.</em></p>"},{"version":"10.0.0-rc.89","channel":"beta","changelog":"<p><strong>Apps SDK</strong></p><ul><li>Fixed an issue where a DNS lookup with an IP address would immediately call the callback.</li></ul><p><strong>Flow</strong></p><ul><li>Fixed an issue where sharing a Flow could result in a 'invalid uri' error.</li></ul><p><strong>Experiments</strong></p><ul><li>Updated the description of the Virtual Devices experiment.</li></ul>"},{"version":"10.0.0-rc.88","channel":"beta","changelog":"<p><strong>Apps SDK</strong></p><ul><li>Fixed an issue where DNS would throw if an IP address was provided to dns.lookup.</li></ul>"},{"version":"10.0.0-rc.87","channel":"beta","changelog":"<p><strong>Apps SDK</strong></p><ul><li>Fixed an issue where DNS would throw if an undefined IP-family would be provided.</li></ul>"},{"version":"10.0.0-rc.85","channel":"beta","changelog":"<p><strong>System</strong></p><ul><li>Improved the memory &amp; cpu usage of running apps.</li><li>Improved overall performance.</li><li>Improved memory usage calculation algorithm.</li><li>Fixed an issue where a restored USB-backup to another Homey Pro would always ask to be factory reset.</li><li>Fixed an issue where discovery results would not be fired.</li><li>Enabled swap memory.</li><li>Various improvements.</li></ul><p><strong>Apps SDK</strong></p><ul><li>Improved DNS performance.</li><li>Improved logging to be more consistent.</li></ul><p><strong>Web API</strong></p><ul><li>Fixed an issue where ManagerApps.getAppSettings() would not return the app's settings.</li><li>Fixed an issue where another user with the owner-role could be created using the Web API.</li></ul>"},{"version":"10.0.0-rc.78","channel":"stable","changelog":"<p><strong>Apps</strong></p><ul><li>Fixed an issue where apps would not reinstall after restoring a cloud backup.</li><li>Fixed an issue where a developer would receive a crash report, when an app could not start when there was not enough memory available.</li></ul><p><strong>System</strong></p><ul><li>Added SSH Experiment, HomeKit Experiment, Zigbee Daemon &amp; CPC Daemon to memory statistics.</li></ul>"},{"version":"10.0.0-rc.76","channel":"beta","changelog":"<p><strong>Satellite Mode</strong></p><ul><li>Added an 'Animate' Flow-then card for Homey Bridge.</li></ul><p><strong>Apps</strong></p><ul><li>Fixed an issue where an app would be uninstalled, if it crashed directly after being installed from the Homey App Store.</li><li>Added safeguards to prevent starting an app when there's not enough free memory.</li></ul><p><strong>System</strong></p><ul><li>Fixed an issue where automatic backups or automatic updates might not install if the 'Restart Homey Pro' Power User experiment card was used around the same time.</li></ul><p><strong>Flow</strong></p><ul><li>Fixed an issue where 'today' was not selectable in the 'The end of the month is'-And card.</li></ul><p><strong>Alarms</strong></p><ul><li>Fixed an issue where the Flow cards 'An alarm goes off in...' and 'Any alarm goes off in...' started, even if the Alarm was disabled.</li></ul>"},{"version":"10.0.0-rc.74","channel":"beta","changelog":"<p><strong>Zigbee</strong></p><ul><li>Fixed an issue that broke creating and restoring Zigbee backups using Homey Pro Backups.</li></ul>"},{"version":"10.0.0-rc.73","channel":"stable","changelog":"<p><strong>Apps SDK</strong></p><ul><li>Fixed an issue where apps could be started regardless if they were fully installed.</li><li>Fixed an issue where an app would receive an error when creating a Notification, if the user had disabled the app's notifications on the Timeline.</li></ul><p><strong>Flow</strong></p><ul><li>Fixed an issue where a shared Flow would appear with black missing icons.</li></ul><p><br></p>"},{"version":"10.0.0-rc.72","channel":"stable","changelog":"<p><strong>Experiments</strong></p><ul><li>Fixed an issue where the 'An app has crashed' Flow card would not start for apps installed with Homey CLI.</li></ul><p><strong>Flow</strong></p><ul><li>Added a missing translation for an inverted 'Alarm is enabled' card.</li></ul>"},{"version":"10.0.0-rc.71","channel":"stable","changelog":"<p><strong>Setup</strong></p><ul><li>Fixed an issue where a previously connected Wi-Fi network would not disconnect when choosing 'Only use Ethernet' in the mobile app. Note that a mobile app update is required before this is resolved.</li></ul><p><strong>Migration</strong></p><ul><li>Fixed an issue where 'Turn all devices on|off'-Flow cards would not migrate correctly.</li></ul><p><strong>Flow</strong></p><ul><li>Fixed an issue where 'The first person came home' and 'The last person left' would not work correctly when one or more users were disabled.</li></ul><p><strong>Experiments</strong></p><ul><li>Added a checkbox 'Exclude from HomeKit' for every device when the HomeKit experiment is enabled.</li><li>HomeKit will now animate Homey Pro's LED Ring when tapping 'Identify' while pairing.</li></ul><p><strong>System</strong></p><ul><li>Added more specific Storage &amp; Memory categories.</li></ul>"},{"version":"10.0.0-rc.70","channel":"stable","changelog":"<ul><li>Fixed an issue where Homey Pro would not start, if older log files were too large.</li></ul>"},{"version":"10.0.0-rc.69","channel":"beta","changelog":"<p><strong>System</strong></p><ul><li>Fixed an issue where system logs would grow too large in size.</li></ul>"},{"version":"10.0.0-rc.66","channel":"beta","changelog":"<p><strong>Experiments</strong></p><ul><li>Added preliminary HomeKit Experiment. Please note that a lot of work still needs to happen here, but the basics should work.</li><li>Fixed an issue where the SSH Experiment would be reset by accident.</li><li>Fixed an issue where Power User Insights would not be deleted after disabling the experiment.</li></ul><p><strong>Wi-Fi</strong></p><ul><li>Improved Wi-Fi reliability.</li></ul><p><strong>Bluetooth LE</strong></p><ul><li>Changed the discovery interval from 10s to 5s.</li><li>Improved performance when scanning for Bluetooth LE devices.</li></ul><p><strong>Apps SDK</strong></p><ul><li>Fixed an issue where Flow-when cards with an Image-tag would not start.</li></ul>"},{"version":"10.0.0-rc.65","channel":"stable","changelog":"<p><strong>Zigbee</strong></p><ul><li>Improved stability of Zigbee stack (should prevent error messages such as \"CPCD_START_TIMEOUT\").</li></ul>"},{"version":"10.0.0-rc.64","channel":"stable","changelog":"<p><strong>Apps SDK</strong></p><ul><li>Fixed an issue where the capability option&nbsp;<code style=\"background-color: var(--color-neutral-muted);\">preventInsights</code>&nbsp;would not work.</li></ul><p><strong>Flow</strong></p><ul><li>Yes/No-tags can now be used inside math equations. Yes will be 1, No will be 0.</li></ul><p><strong>Alarms</strong></p><ul><li>Fixed an issue where the Flow-card 'Alarm goes off' didn't start.</li></ul><p><strong>Bluetooth LE</strong></p><ul><li>Increased the discovery timeout from 7.5s to 10s to find more devices.</li></ul><p><strong>Insights</strong></p><ul><li>Improved the performance of writing Number-type Insights. As a side-effect, your storage of the 'Logs' under 'Storage' should become smaller within a few days.</li></ul>"},{"version":"10.0.0-rc.62","channel":"stable","changelog":"<p><strong>System</strong></p><ul><li>Added Insights for CPU Load</li></ul><p><strong>Devices</strong></p><ul><li>Fixed an issue where a Device with Boolean-type log would not have a&nbsp;<code style=\"background-color: var(--color-neutral-muted);\">titleTrue</code>&nbsp;and&nbsp;<code style=\"background-color: var(--color-neutral-muted);\">titleFalse</code>&nbsp;when these were set with&nbsp;<code style=\"background-color: var(--color-neutral-muted);\">Device.setCapabilitiesOptions</code>.</li><li>Energy values are now recalculated after an app calls&nbsp;<code style=\"background-color: var(--color-neutral-muted);\">setEnergy</code>.</li></ul><p><strong>Alarms</strong></p><ul><li>Fixed an issue where a Flow or Advanced Flow with an Alarm-when card would not start if the Flow was created after the alarm.</li></ul>"},{"version":"10.0.0-rc.61","channel":"stable","changelog":"<p><strong>Apps</strong></p><ul><li>Fixed an issue where apps would auto-update even when auto-updates were disabled.</li><li>Fixed an issue where the number of apps would be capped at 50.</li></ul><p><strong>Devices</strong></p><ul><li>Fixed an issue where the number of devices would be capped at 250.</li></ul><p><strong>Insights</strong></p><ul><li>Fixed an issue where the error 'No such file or directory' would appear when opening an empty log.</li></ul>"},{"version":"10.0.0-rc.59","channel":"stable","changelog":"<p><strong>Migration</strong></p><ul><li>Fixed an issue where Flows would not be migrated.</li><li>Fixed an issue where Text-type Variables would be surrounded by \" and \".</li><li>Improved migration reliability.</li></ul>"},{"version":"10.0.0-rc.58","channel":"stable","changelog":"<p><strong>System</strong></p><ul><li>Crashes where Homey Pro crashes are now also reported.</li><li>Improved Homey Pro's startup I/O performance.</li></ul>"},{"version":"10.0.0-rc.57","channel":"stable","changelog":"<p><strong>Insights</strong></p><ul><li>Fixed an issue where Boolean-type Logs could become corrupt.</li></ul>"},{"version":"10.0.0-rc.56","channel":"stable","changelog":"<p><strong>System</strong></p><ul><li>Fixed an issue where sent logs would not make Homey Pro out-of-memory.</li><li>Optimized cpu &amp; memory usage during the first boot.</li></ul><p><strong>Apps SDK</strong></p><ul><li>ManagerBLE.find() now also discovers devices first.</li></ul>"},{"version":"10.0.0-rc.55","channel":"stable","changelog":"<p><strong>System</strong></p><ul><li>Reduced system log file size.</li><li>Improved the CPU resource allocation between processes.</li></ul><p><strong>Apps SDK</strong></p><ul><li>Fixed an issue where&nbsp;<code style=\"background-color: var(--color-neutral-muted);\">Device.onRenamed</code>&nbsp;did not run when a device has been renamed.</li><li>Devices with another class than&nbsp;<code style=\"background-color: var(--color-neutral-muted);\">homealarm</code>&nbsp;but with the&nbsp;<code style=\"background-color: var(--color-neutral-muted);\">homealarm_state</code>&nbsp;capability will now also get Flow cards for&nbsp;<code style=\"background-color: var(--color-neutral-muted);\">homealarm_state</code>.</li><li>Fixed an issue in passing errors when debugging remotely (inside Docker).</li><li>Fixed an issue where running apps remotely would not work.</li></ul><p><strong>Advanced Flow</strong></p><ul><li>Fixed an issue when an incorrect Tag-type was returned, the Advanced Flow Card would not throw an error.</li></ul>"},{"version":"10.0.0-rc.53","channel":"beta","changelog":"<p><strong>Insights</strong></p><ul><li>Optimized Boolean-type Log persistent storage. Previously, these were also stored in-memory. This should lead to a memory reduction of the Homey process.</li><li>Fixed an issue with saving Number-type Log values when Homey Pro was busy.</li></ul><p><strong>Apps</strong></p><ul><li>Improved the auto-download mechanism of apps that are not correctly installed.</li></ul>"},{"version":"10.0.0-rc.51","channel":"stable","changelog":"<p><strong>System</strong></p><ul><li>Added logfile size to Settings → General → Storage.</li><li>Fixed an issue where creating a Diagnostics Report would make Homey Pro out-of-memory.</li></ul>"},{"version":"10.0.0-rc.50","channel":"stable","changelog":"<p><strong>Zigbee</strong></p><ul><li>Fixed an issue that might cause an error during pairing.</li><li>Add extended interview for zigbee devices</li><li>Add option to ping zigbee devices for their online state</li></ul><p><strong>System</strong></p><ul><li>Improved the speed of which the ESP32 is updated.</li></ul>"},{"version":"10.0.0-rc.49","channel":"stable","changelog":"<p><strong>Zigbee</strong></p><ul><li>Fixed an issue that might occur during pairing due to unexpected behaviour from joining node.</li></ul><p><strong>Satellite Mode</strong></p><ul><li>Added support for&nbsp;<code style=\"background-color: var(--color-neutral-muted);\">Driver.rf433.satelliteMode = true</code>&nbsp;and&nbsp;<code style=\"background-color: var(--color-neutral-muted);\">Driver.infrared.satelliteMode = true</code>.</li></ul><p><strong>Wi-Fi Setup</strong></p><ul><li>Added support for hidden Wi-Fi networks.</li></ul>"},{"version":"10.0.0-rc.48","channel":"stable","changelog":"<p><strong>Devices</strong></p><ul><li>Fixed an issue where a driver's&nbsp;<code style=\"background-color: var(--color-neutral-muted);\">capabilitiesOptions</code>&nbsp;would not be applied.</li><li>Fixed an issue where Maintenance Actions would not be visible after migration.</li><li>Fixed an issue where a migrated Device.store was&nbsp;<code style=\"background-color: var(--color-neutral-muted);\">null</code>.</li><li>Fixed an issue where a device's timeline would be empty, or missing titles.</li></ul><p><strong>Flow</strong></p><ul><li>Fixed an issue where a migrated Flow would have missing a user's presence tags.</li></ul><p><strong>Zigbee</strong></p><ul><li>Fixed an issue that might cause particular devices to leave directly after joining.</li></ul>"},{"version":"10.0.0-rc.47","channel":"stable","changelog":"<p><strong>System</strong></p><ul><li>Improved reliability of CM4 ⇋ ESP32 communication.</li></ul><p><strong>Backups</strong></p><ul><li>Fixed an issue where creating a backup could crash if the Homey Pro had too many Insights.</li></ul><p><strong>Energy</strong></p><ul><li>Fixed make power measurements negative only for devices with virtual class \"solarpanel\".</li></ul><p><strong>Zigbee</strong></p><ul><li>Fixed an issue that could occur during interview of devices that have default endpoint ids that don't start at 1.</li><li>By default bind clusters onoff and level control if available. This fixes backwards compatibility for some drivers.</li></ul>"},{"version":"10.0.0-rc.46","channel":"stable","changelog":"<p><strong>Z-Wave</strong></p><ul><li>Added the Brightness-capability for devices with the Multilevel Switch Command Class.</li></ul><p><strong>Apps</strong></p><ul><li>Fixed an issue where an app would not restart after the process has stopped.</li></ul><p><strong>API Keys</strong></p><ul><li>Fixed an issue where an API Key would accidentally expire.</li></ul>"},{"version":"10.0.0-rc.45","channel":"stable","changelog":"<p><strong>Devices</strong></p><ul><li>Fixed a Device Settings issue where 'attr.min|max|step' would be ignored.</li></ul><p><strong>Flow</strong></p><ul><li>Added Flow Tags for Sunset &amp; Sunrise.</li></ul><p><strong>Energy</strong></p><ul><li>Fixed power measurements from generating devices (e.g. solar panels) are now negative.</li></ul><p><strong>Zigbee</strong></p><ul><li>Fixed an issue that caused some Zigbee remotes that use group addressing to not trigger Flows. Requires a one-time repair.</li><li>Fixed an issue that could cause communication during pairing to fail.</li></ul><p><strong>Z-Wave</strong></p><ul><li>Added a Web API endpoint for 'Remove Unknown Nodes' in the Developer Tools.</li></ul><p><br></p>"},{"version":"10.0.0-rc.44","channel":"stable","changelog":"<p><strong>System</strong></p><ul><li>A session is now active for 7 days.</li><li>A session will now prevent expiry when Homey Pro isn't connected to Homey Connect.</li><li>Fixed an issue where a pair session would stay active when the browser's tab was closed.</li></ul>"},{"version":"10.0.0-rc.43","channel":"stable","changelog":"<p><strong>Apps SDK</strong></p><ul><li>Added Image.localUrl and Image.cloudUrl.</li><li>Removed empty-check for a device's settings' password.</li></ul>"},{"version":"10.0.0-rc.42","channel":"stable","changelog":"<p><strong>Flow</strong></p><ul><li>Added 'When... Any device's alarm turned on' card for every Zone.</li><li>Added 'When... Any device's alarm turned off' card for every Zone.</li><li>Added 'When... Any device's sensor value changed' card for every Zone.</li><li>Added 'When... The zone has been active for...' card for every Zone.</li><li>Added 'And... All devices are turned on' card for every Zone.</li><li>Added 'And... All devices are turned off' card for every Zone.</li><li>Added 'And... All alarms are turned on' card for every Zone.</li><li>Added 'And... All alarms are turned off' card for every Zone.</li><li>Fixed translations for some Zone Activity cards.</li></ul><p><br></p>"},{"version":"10.0.0-rc.41","channel":"stable","changelog":"<p><strong>Apps SDK</strong></p><ul><li>Fixed an issue where 'capabilitiesOptions' would be ignored after running 'Device.removeCapability'.</li></ul><p><strong>Flow</strong></p><ul><li>Fixed an issue where the Flow cards of Garage Door devices would not work.</li></ul><p><strong>Z-Wave</strong></p><ul><li>Fixed an issue where 'Send Basic On/Off' in the DeveloperTools did not work properly.</li></ul><p><br></p>"},{"version":"10.0.0-rc.40","channel":"stable","changelog":"<p><strong>Bluetooth LE</strong></p><ul><li>Improved stability.</li><li>Added support for notifications.</li><li>Added support for disconnect events.</li></ul><p><strong>Satellite Mode</strong></p><ul><li>Improved lifecycle of Homey Bridge when renaming, moving between zones and removing from Homey Pro.</li><li>Added Satellite Mode support for the built-in Infrared devices.</li></ul><p><br></p>"},{"version":"10.0.0-rc.38","channel":"stable","changelog":"<p><strong>Apps SDK</strong></p><ul><li>Improved apps lifecycle and crashed states.</li><li>Fixed an issue where events would appear more than once.</li></ul><p><strong>HomeyScript</strong></p><ul><li>Fixed an issue where HomeyScript did not have access to another app's Web API.</li></ul><p><br></p>"},{"version":"10.0.0-rc.37","channel":"stable","changelog":"<p><strong>Bluetooth</strong></p><ul><li>Added preliminary support for ManagerBLE.</li></ul><p><em>Note: BLECharacteristic.subscribeToNotifications is not yet available.</em></p><p><em>Note: disconnect events are not yet sent to the app.</em></p><p><strong>Apps SDK</strong></p><ul><li>Fixed an issue where a remotely running app could be enabled, disabled or restarted.</li></ul>"},{"version":"10.0.0-rc.35","channel":"stable","changelog":"<p><strong>Apps SDK</strong></p><ul><li>Added support for ManagerInsights.</li><li>Added support for Device.setClass.</li><li>Fixed an issue where Device.setUnavailable would be overwritten when placed in Device.onInit.</li><li>Fixed an issue where a disabled app would not initialize properly.</li></ul><p><strong>Zigbee</strong></p><ul><li>Repairing will now work regardless of selected device to repair.</li><li>Fixed an issue that might have caused the \"Something went wrong\" error during pairing.</li><li>Improved error handling during pairing.</li><li>Improved support for pairing Xiaomi devices.</li><li>Adding a device that already exists will now properly repair the device. This prevents users from adding a new device and ending up with an existing unavailable device due to the device reset during pairing.</li></ul><p><strong>Migration</strong></p><ul><li>Fixed an issue where a Flow or Advanced Flow would not start until it was saved manually.</li></ul><p><strong>System</strong></p><ul><li>Fixed an issue where logs would not be deleted properly and fill up the user partition.</li></ul>"},{"version":"10.0.0-rc.33","channel":"stable","changelog":"<p><strong>Apps SDK</strong></p><ul><li>Improved 'homey app run --remote' lifecycle.</li><li>Added a helpful hint when 'App.onInit' took too long.</li></ul><p><br></p>"},{"version":"10.0.0-rc.32","channel":"stable","changelog":"<p><strong>Alarms</strong></p><ul><li>Fixed an issue where an Alarm without repetitions would let Homey Pro hang.</li><li>Alarms without repetitions will automatically be disabled after they've run.</li></ul><p><strong>Apps SDK</strong></p><ul><li>Fixed an issue with Homey.Image used in Flow as tag.</li></ul>"},{"version":"10.0.0-rc.31","channel":"stable","changelog":"<p><strong>Apps SDK</strong></p><ul><li>Fixed an issue where apps started with 'homey app run --remote' would not stop running.</li><li>Fixed an issue where apps started with 'homey app install' would have the environment variable 'DEBUG' set to '1'.</li><li>Fixed an issue where emitting events from a custom pair view would error, if the payload was not an object.</li></ul><p><strong>Web API</strong></p><ul><li>Return&nbsp;<code style=\"background-color: var(--color-neutral-muted);\">error_description</code>&nbsp;for legacy node-athom-api compatibility.</li></ul><p><strong>Devices</strong></p><ul><li>Remove all PairSessions when a Driver has been removed.</li></ul><p><br></p>"},{"version":"10.0.0-rc.29","channel":"stable","changelog":"<p><strong>Alarms</strong></p><ul><li>Alarms are once again available on Homey Pro.</li></ul><p><strong>Z-Wave</strong></p><ul><li>Added support for logging in the Developer Tools.</li></ul><p><strong>Experiments</strong></p><ul><li>Fixed a bug where an experiment could be enabled or disabled while it was starting or stopping.</li></ul><p><strong>Web API</strong></p><ul><li>Added ManagerZones.getZone()</li></ul><p><br></p>"},{"version":"10.0.0-rc.28","channel":"stable","changelog":"<p><strong>Apps SDK</strong></p><ul><li>The environment variable DEBUG=1 is now set when running 'homey app run --remote'.</li><li>Fixed an issue where app-to-app communication would not pass body parameters.</li><li>Fixed an issue where app-to-app communication would pass query parameters incorrectly.</li><li>Added support for titleTrue and titleFalse capability options.</li><li>Fixed an issue where FlowCard.getArgumentValues() would not work correctly.</li></ul><p><strong>Migrations</strong></p><ul><li>Fixed an issue where the Virtual Switch and Virtual IP Cam would not migrate properly.</li></ul><p><br></p>"},{"version":"10.0.0-rc.27","channel":"stable","changelog":"<p><strong>Zigbee</strong></p><ul><li>Fixed an issue that caused missing Zigbee network settings in the Developer Tools after a reboot.</li><li>Fixed an issue that might cause an unhandled rejection for basic Zigbee devices by updating the zigbee-clusters dependency.</li></ul><p><strong>Apps</strong></p><ul><li>Added support for Devices with an icon that starts with&nbsp;<code style=\"background-color: var(--color-neutral-muted);\">../../../userdata/</code>.</li><li>Added support for Capabilities with an icon that starts with&nbsp;<code style=\"background-color: var(--color-neutral-muted);\">/userdata/</code>.</li><li>Fixed an issue where&nbsp;<code style=\"background-color: var(--color-neutral-muted);\">Homey.set</code>&nbsp;would throw an error in App Settings.</li></ul>"},{"version":"10.0.0-rc.26","channel":"stable","changelog":"<p><strong>Apps</strong></p><ul><li>Added support for running apps on Homey Pro by executing <em>homey app run --remote</em>. This requires <a href=\"https://apps.developer.homey.app/the-basics/getting-started/homey-cli\" rel=\"noopener noreferrer\" target=\"_blank\">Homey CLI</a> v2.33.0 or later.</li><li>Fixed an issue where Diagnostics Reports would show <em>Console disabled.</em></li></ul>"},{"version":"10.0.0-rc.25","channel":"stable","changelog":"<p><strong>Experiments</strong></p><ul><li>Disabled HomeKit Experiment because it's not finished yet.</li></ul><p><strong>Flow</strong></p><ul><li>Fixed an issue in preventing loops in a Flow.</li></ul>"},{"version":"10.0.0-rc.24","channel":"stable","changelog":"<p><strong>Flow</strong></p><ul><li>Added protection against Flows starting in a loop.</li><li>Added hints for Zone Activity cards.</li></ul><p><strong>Zigbee</strong></p><ul><li>Improved fix for an issue that could cause high resource usage when idle.</li></ul>"},{"version":"10.0.0-rc.23","channel":"beta","changelog":"<p><strong>Flow</strong></p><ul><li>Added protection against Flows starting in a loop.</li><li>Added hints for Zone Activity cards.</li></ul>"},{"version":"10.0.0-rc.22","channel":"stable","changelog":"<p><strong>System</strong></p><ul><li>Fixed an issue where Ethernet would not be detected after a Factory Reset during setup.</li><li>Fixed an issue where Wi-Fi's SSID would show up with encoded characters.</li></ul><p><strong>Devices</strong></p><ul><li>Fixed an issue where a Virtual Button would not be clickable in the Mobile App &amp; Web App.</li></ul><p><strong>Apps SDK</strong></p><ul><li>Fixed an issue where MAC-based discovery would not work.</li></ul><p><strong>Zigbee</strong></p><ul><li>Fixed an issue that could cause high resource usage when idle.</li></ul>"},{"version":"10.0.0-rc.21","channel":"stable","changelog":"<p><strong>Apps</strong></p><ul><li>Apps now run in Docker-host mode, instead of bridge mode. This means the `ports` property in app.json has become obsolete. This also fixed UDP discovery.</li><li>Apps now use cached DNS requests.</li></ul><p><strong>Zigbee</strong></p><ul><li>Fixed a potential loop when updating a capability value.</li></ul><p><strong>Web API</strong></p><ul><li>Fixed an issue for ManagerNotifications.deleteNotifications() with an empty filter.</li><li>Return Zone.activeOrigins.</li></ul>"},{"version":"10.0.0-rc.20","channel":"stable","changelog":"<p><strong>System</strong></p><ul><li>Fixed an issue where settings and capabilities could mix between devices.</li></ul>"},{"version":"10.0.0-rc.19","channel":"stable","changelog":"<p><strong>System</strong></p><ul><li>Fixed an issue where settings and capabilities could mix between devices.</li></ul>"},{"version":"10.0.0-rc.18","channel":"stable","changelog":"<p><strong>System</strong></p><ul><li>Fixed an issue where 'Not Implemented' would appear in the Developer Tools.</li><li>Fixed an issue where Zones could be deleted which contained Devices or Zones.</li></ul><p><strong>Insights</strong></p><ul><li>Fixed an issue where Insights Charts would appear incorrect</li></ul><p><strong>Zigbee</strong></p><ul><li>Added support for Network Settings in the Developer Tools.</li><li>Fixed an issue where Homey Pro could crash.</li></ul>"},{"version":"10.0.0-rc.17","channel":"stable","changelog":"<p><strong>System</strong></p><ul><li>Added support for Personal Access Tokens.</li><li>Added Logic Webhook support.</li><li>Added support to transfer ownership.</li></ul><p><strong>Flow</strong></p><ul><li>Fixed an issue where cards with a device-search argument would be empty.</li><li>Fixed an issue where deprecated cards would still show.</li><li>Fixed an issue where 'The zone is inactive for' would not work after a migration from a previous generation Homey Pro.</li></ul><p><strong>Z-Wave</strong></p><ul><li>Fixed an issue where the mobile app would not load.</li></ul><p><br></p>"},{"version":"10.0.0-rc.16","channel":"stable","changelog":"<p><strong>System</strong></p><ul><li>Fixed an issue where Homey Pro's Wi-Fi MAC address would not display correctly.</li><li>Fixed an issue where Homey Pro's Ethernet MAC address would not display correctly.</li></ul><p><strong>Family &amp; Guests</strong></p><ul><li>Added support for 'Transfer Ownership'</li><li>Added support for API Keys</li></ul><p><strong>Zigbee</strong></p><ul><li>Fixed an issue where 'Missing Node' would happen when Zigbee was not yet initialised.</li><li>Improved pairing screens.</li></ul>"},{"version":"10.0.0-rc.15","channel":"stable","changelog":"<p><strong>Core</strong></p><ul><li>Logs are now persisted across reboots.</li></ul><p><strong>Flow</strong></p><ul><li>Fixed an issue where a When-card's tags missed a type-property.</li><li>Added an Apps SDK method to get argument values for a card.</li></ul><p><strong>Developer</strong></p><ul><li>Fixed an issue where apps could not be run when a driver didn't have their own icon.svg.</li></ul><p><strong>Web API</strong></p><ul><li>Fixed an issue where a property's null-value would be ignored.</li><li>Added FlowCardAction.durationMin, FlowCardAction.durationMax.</li></ul>"},{"version":"10.0.0-rc.14","channel":"beta","changelog":"<p><strong>Flow</strong></p><ul><li>Fixed an issue where 'Zone is inactive for ...' cards would not start.</li></ul><p><strong>Migration</strong></p><ul><li>Added support for more Flow Cards.</li></ul>"},{"version":"10.0.0-rc.13","channel":"stable","changelog":"<p><strong>Core</strong></p><ul><li>Added syncing to Google Assistant</li><li>Added a notification for SDKv2 apps that could not be migrated.</li><li>Fixed an issue where scheduled tasks would not start correctly.</li><li>Fixed an issue where some translations would not load correctly.</li><li>Improved support for the Web API using Socket.io.</li></ul><p><strong>Flow</strong></p><ul><li>Fixed an issue where the 'Restart Homey Pro' Flow card would not work correctly.</li><li>Fixed an issue where Advanced Flows would not start.</li></ul><p><strong>Satellite Mode</strong></p><ul><li>Fixed an issue where Homey Bridge would not connect correctly.</li></ul><p><strong>Backups</strong></p><ul><li>Fixed an issue where auto-Backups would show an error on the Timeline when Homey Pro Backups was not purchased.</li></ul><p><strong>Migration</strong></p><ul><li>Fixed an issue where Homey Pro's name would not be set correctly after migration.</li><li>Improved Zigbee device unavailable message.</li></ul><p><br></p>"},{"version":"10.0.0-rc.11","channel":"stable","changelog":"<ul><li>Added support for migrating Z-Wave from a previous generation Homey Pro.</li><li>Added support for migrating Zigbee from a previous generation Homey Pro. Note that devices need to be repaired manually one-by-one.</li><li>Added Timeline notifications when an app has been automatically updated.</li><li>Added Timeline notification when an automatic backup has failed.</li><li>Fixed an issue where setting the system language would not work.</li><li>Fixed an issue where Advanced Flow cards would not migrate properly from a previous generation Homey Pro.</li><li>Fixed an issue where setting the update channel would hang.</li><li>Fixed an issue where installing apps from the Homey App Store would timeout.</li><li>Updated translations.</li></ul>"},{"version":"10.0.0-rc.10","channel":"beta","changelog":"<ul><li>Updated translations.</li></ul>"},{"version":"10.0.0-rc.9","channel":"stable","changelog":"<ul><li>Fixed an issue where Z-Wave, Zigbee and Virtual devices would not be migrated from an earlier generation Homey Pro.</li><li>Added support for publishing network ports for an app.</li><li>Fixed issues related to advanced app settings.</li><li>Fixed issues related to proxying assets when running an app using Homey CLI.</li><li>Fixed an issue where ManagerCloud.getLocalAddress would not work in apps.</li><li>Fixed an issue where an app's channel would not be saved when auto-installing missing apps.</li><li>Removed App.hasDrivers property in the Web API.</li></ul>"},{"version":"10.0.0-rc.8","channel":"stable","changelog":"<ul><li>Improved DNS server configuration.</li></ul>"},{"version":"10.0.0-rc.7","channel":"stable","changelog":"<ul><li>Improved NTP server configuration.</li></ul>"},{"version":"10.0.0-rc.6","channel":"stable","changelog":"<ul><li>Added support to set Wi-Fi Country during setup.</li><li>Improved debug logging.</li><li>Improved NTP server configuration.</li></ul>"},{"version":"10.0.0-rc.5","channel":"stable","changelog":"<ul><li>Updated translations.</li></ul>"},{"version":"10.0.0-rc.4","channel":"stable","changelog":"<ul><li>Fixed an issue where some apps would not install.</li><li>Fixed an issue where ESP32 crashes wouldn't be reported correctly.</li><li>Added functionality to report code-level bugs automatically.</li></ul>"},{"version":"10.0.0-rc.3","channel":"stable","changelog":"<ul><li>Fixed an issue where apps would not start.</li></ul>"},{"version":"10.0.0-rc.2","channel":"stable","changelog":"<ul><li>Fixed an issue where Wi-Fi network would not show up.</li><li>Improved the Bluetooth Advertisements interval.</li><li>Fixed an issue where apps would not install again after a previously failed install.</li><li>Fixed an issue where the LED Ring would not become pink before updating the coprocessor.</li></ul>"},{"version":"10.0.0-rc.1","channel":"stable","changelog":"<p>This is the first Release Candidate!</p>"}]